ประกวดราคาซื้อชุดไม้ฉนวนสำหรับงานฮอทสติก 22,33 kV (จำนวน 23รายการ)

• เพื่อจัดหาเครื่องมือและอุปกรณ์สำหรับงานฮอทสติก (Hot Stick) ที่มีมาตรฐานความปลอดภัยสูง สำหรับใช้ปฏิบัติงานในระบบจำหน่ายไฟฟ้าแรงสูง 22 และ 33 kV
• เพื่อสนับสนุนภารกิจการซ่อมแซมและบำรุงรักษาระบบจำหน่ายไฟฟ้าขณะมีกระแสไฟฟ้าอยู่ (Live Line Maintenance) โดยไม่ต้องดับกระแสไฟ
• เพื่อลดผลกระทบจากการดับกระแสไฟฟ้าต่อผู้ใช้บริการ และเพิ่มความเชื่อถือได้ของระบบจำหน่ายไฟฟ้าของการไฟฟ้าส่วนภูมิภาค
• เพื่อให้หน่วยงานภาคสนามมีเครื่องมือและอุปกรณ์ประจำเสาและรถกระเช้าที่ครบถ้วนตามข้อกำหนดเฉพาะของ PEA

• จัดหาและส่งมอบชุดเครื่องมือสำหรับงานฮอทสติก 22,33 kV จำนวน 23 รายการ ตามรายการและคุณสมบัติเฉพาะ (Specification) ของการไฟฟ้าส่วนภูมิภาค (PEA) กำหนด
• ดำเนินการทดสอบคุณสมบัติทางไฟฟ้าและทางกลของอุปกรณ์ตามมาตรฐานที่ระบุใน TOR (เช่น การทดสอบทนแรงดันไฟฟ้าไม่น้อยกว่า 75 kV หรือ 100 kV ต่อฟุต เป็นเวลา 5 นาที)
• จัดส่งมอบอุปกรณ์ทั้งหมด ณ สถานที่จัดเก็บของการไฟฟ้าส่วนภูมิภาค พร้อมเอกสารคู่มือและใบรับรองคุณภาพจากโรงงานผู้ผลิต

• Wire Tong (Hook type tong head) ขนาดต่างๆ (2½" x 14’, 2½" x 16’ Spliced, 2" x 8’, 2" x 10’, 2" x 12’) รวม 5 รายการ
• Clamp Stick (Grip all type) ขนาด 1¼" x 8’ และ 1¼" x 12’ จำนวน 2 รายการ
• Tie Stick (Rotary blade และ Rotary prong) ขนาด 1¼" x 8’ จำนวน 2 รายการ
• Universal Pole (2 Splines) ขนาด 1¼" x 8’ และ 1¼" x 12’ จำนวน 2 รายการ
• Wire Holding Stick ขนาด 1¼" x 8’ จำนวน 1 รายการ
• Conductor Cutter มีด้ามฉนวนสำหรับ ACSR และ AL จำนวน 2 รายการ
• Cable Cutter (Ratchet type) สำหรับ ACSR และ AL ขนาด 1½" x 8’ จำนวน 2 รายการ
• Wire Cutter (Lever type) ขนาด 6’ จำนวน 1 รายการ
• Roller Link Stick ขนาด 1¼" x 6’ จำนวน 6 ชิ้น
• Spliced Disconnect Stick จำนวน 1 ชุด
• Insulated Hanger ขนาด 1¼" x 15" จำนวน 3 ชิ้น
• Dual Auxiliary Arm Complete Set จำนวน 1 ชุด
• Wire Holder Insulator จำนวน 3 ชิ้น
• Fiberglass Telescopic Ladders (Straight extension ladders) จำนวน 1 ชุด

• อ้างอิงตามกำหนดเวลาการยื่นซองและส่งมอบในเอกสารประกวดราคาจัดซื้อจัดจ้างภาครัฐของการไฟฟ้าส่วนภูมิภาค (PEA)

• Eligibility Requirements: เป็นผู้มีอาชีพขายพัสดุที่ประกวดราคาซื้อด้วยวิธีประกวดราคาอิเล็กทรอนิกส์ (e-bidding) และไม่เป็นผู้ถูกระบุชื่อไว้ในบัญชีรายชื่อผู้ทิ้งงานของทางราชการ
• Standards Compliance: ผลิตภัณฑ์ต้องเป็นไปตามข้อกำหนดเฉพาะ (Specification) ของ PEA และผลิตจากโรงงานที่ได้มาตรฐานสากล (เช่น ASTM สำหรับฉนวนกันความสว่าง)
• Experience: มีประสบการณ์ในการจำหน่ายเครื่องมือหรืออุปกรณ์ไฟฟ้าแรงสูงให้กับหน่วยงานภาครัฐหรือรัฐวิสาหกิจ
• Technical Capabilities: สามารถจัดหาเครื่องมือที่เป็นวัสดุ Epoxiglas หรือเทียบเท่า ที่มีคุณสมบัติทนแรงดันไฟฟ้าตามเกณฑ์การทดสอบที่กำหนด
• Personnel: -

• ใช้เกณฑ์ราคา (Price Criterion) ในการพิจารณาตัดสินผู้ชนะการเสนอราคา ตามระเบียบการจัดซื้อจัดจ้างภาครัฐ

• วัสดุหลักของแกนเสา (Pole): ทำจาก Epoxiglas หรือวัสดุฉนวนเทียบเท่า
• คุณสมบัติทางไฟฟ้า: ต้องมีค่าความต้านทานและทนแรงดันไฟฟ้าไม่น้อยกว่า 75 kV หรือ 100 kV ต่อฟุต เป็นเวลา 5 นาที (ขึ้นอยู่กับข้อกำหนดเฉพาะของแต่ละรายการเครื่องมือ)
• มาตรฐานอ้างอิง: เป็นไปตามข้อกำหนดเฉพาะของ PEA เช่น R-133/2540, RHOT-003/2547, R-130/2539, R-182/2536, R-275/2544, R-180/2547, R-181/2537, R-131/2540, R-166/2536, RHOT-040/2022, R-272/2536, R-453/2539 และมาตรฐาน ASTM

• การจ่ายเงิน: เป็นไปตามเงื่อนไขมาตรฐานของการไฟฟ้าส่วนภูมิภาค (จ่ายเงินเมื่อตรวจรับพัสดุเรียบร้อยแล้ว)
• ค่าปรับ: กรณีผู้ขายไม่สามารถส่งมอบพัสดุได้ภายในกำหนดเวลา จะต้องชำระค่าปรับตามอัตราร้อยละของมูลค่าพัสดุที่ยังไม่ได้รับมอบตามสัญญา

1. Q: โครงการนี้ใช้สำหรับระบบไฟฟ้าแรงดันเท่าใด?
   A: ใช้สำหรับระบบจำหน่ายไฟฟ้าแรงสูงขนาด 22 kV และ 33 kV
2. Q: วัสดุหลักที่ใช้ทำด้ามเสาของเครื่องมือคืออะไร?
   A: ทำจากวัสดุ Epoxiglas หรือวัสดุฉนวนเทียบเท่าที่มีคุณสมบัติทางไฟฟ้าสูง
3. Q: คุณสมบัติการทนแรงดันไฟฟ้าของอุปกรณ์กำหนดไว้อย่างไร?
   A: ต้องมีค่าทนแรงดันไฟฟ้าไม่น้อยกว่า 75 kV หรือ 100 kV ต่อฟุต เป็นเวลา 5 นาที (ตามข้อกำหนดเฉพาะของแต่ละรายการ)
4. Q: ชุดเครื่องมือทั้งหมดมีจำนวนกี่รายการ?
   A: มีจำนวนรวมทั้งหมด 23 รายการ
5. Q: อุปกรณ์ประเภท Wire Tong มีการกำหนดขนาดความยาวและหัวจับอย่างไรบ้าง?
   A: มีตั้งแต่ขนาด 2" และ 2½" ความยาวตั้งแต่ 8 ฟุต ถึง 16 ฟุต (รวมถึงแบบต่อความยาว Spliced)
6. Q: เครื่องมือตัดสายตัวนำในชุดประกอบด้วยอะไรบ้าง?
   A: ประกอบด้วย Conductor cutter สำหรับ ACSR และ AL, Cable cutter แบบ Ratchet type และ Wire cutter แบบ Lever type
7. Q: อุปกรณ์ Link Stick ในชุดประกอบด้วยแบบใดบ้าง?
   A: ประกอบด้วย Strain type, Spiral type และ Roller type
8. Q: โครงการนี้ดำเนินการจัดซื้อโดยหน่วยงานใด?
   A: การไฟฟ้าส่วนภูมิภาค (PEA)
9. Q: มีมาตรฐานสากลใดที่นำมาอ้างอิงในข้อกำหนดทางเทคนิค?
   A: มีการอ้างอิงมาตรฐาน ASTM สำหรับอุปกรณ์บางประเภท เช่น Cable cutter
10. Q: ชุด Dual Auxiliary Arm รองรับแรงดันไฟฟ้าสูงสุดเท่าใด?
    A: ออกแบบมาเพื่อใช้งานกับระบบไฟฟ้าแรงดันสูงสุดถึง 11 kV หรือตามข้อกำหนดในชุดอุปกรณ์เสริมสำหรับงานยกสาย

รำยกำรเครื่องมือชุดเครื่องมือส ำหรับงำนฮอทสติก22,33 kV (23รำยกำร)
ที่
วัสดุเลขที่
รำยกำร
จ ำนวน
หน่วย
Spec

ชุดไม้ฉนวนส ำหรับงำนฮอทสติก22,33 kV (จ ำนวน 23 รำยกำร)






1 
1090210010 
Wire tong (Hook type tong head) 2 ½" x 14' 
1 
EA 
R-133/2540 Item 7
2 
1090210004 
Wire tong (Hook type tong head) 2 ½" x 16' (Spliced) 
1 
EA 
R-133/2540 Item 4
3 
1090210001 
Wire tong (Hook type tong head) 2" x 10' 
1 
EA 
R-133/2540 Item 2
4 
1090210002 
Wire tong (Hook type tong head) 2" x 12' 
2 
EA 
R-133/2540 Item 3
5 
1090210000 
Wire tong (Hook type tong head) 2" x 8' 
3 
EA 
R-133/2540 Item 1
6 
1090200011 
Clamp stick, grip all type 1¼" x 8' 
2 
EA 
RHOT-003/2547 Item 1
7 
1090200013 
Clamp stick, grip all type 1¼" x 12' 
2 
EA 
RHOT-003/2547 Item 2
8 
1090200003 
Tie stick (Rotary blade - Universal) 1 ¼" x 8' 
5 
EA 
R-130/2539 Item 2
9 
1090200001 
Tie stick (Rotary prong - Universal) 1 ¼" x 8' 
1 
EA 
R-130/2539 Item 1
10 
1090200139 
Universal pole (2 Splines) 1 ¼" x 12' 
2 
EA 
R-182/2536 Item 2
11 
1090200102 
Universal pole (2 Splines) 1 ¼" x 8' 
2 
EA 
R-182/2536 Item 1
12 
1090210214 
Wire holding stick 1 ¼" x 8' 
1 
EA 
R-158/2537 Item 2
13 
1090050017 
Conductor cutter with insulated handle for ACSR 
1 
EA 
R-275/2544 Item 1
14 
- 
Conductor cutter with insulated handle for AL 
1 
EA 
R-275/2544 Item 2
15 
1090200141 
Cable cutter, ratchet type, for ACSR 1½" x 8' 
1 
EA 
R-180/2547 Item 2
16 
1090200163 
Cable cutter, ratchet type, for AL 1½" x 8' 
1 
EA 
R-180/2547 Item 4
17 


Wire Cutter Lever type 6' 
1 
EA 
R-181/2537
18 
1090210205 
Roller link stick 1 ¼" x 6' 
6 
EA 
R-131/2540 Item 6
19 
1090130000 
Spliced disconnect stick 
1 
Set 
RHOT-001/2547 Item 4
20 
1090200162 
Insulated hanger 1 ¼" x 15" 
3 
EA 
R-166/2536
21 
1090210208 

1090210126

1090210212
Dual auxiliary arm Complete set

1. Dual auxiliary arm (1 ea)

2. Saddle chain for dual auxiliary side arm (1 ea)

3. Wire tong stirrup 2 ½" (2 ea)

4. Wire holder (Fork type) 1 ½" (3 ea)

5. Auxiliary arm " T " clamp 2 ½" (1 ea)
   1
   Set
   RHOT-040/2022 Item 1

   22
   1090210225
   Wire holder insulator
   3
   EA
   R-272/2536
   23
   1090230035
   Fiberglass telescopic ladders (Straight extension ladders)
   1
   Set
   R-453/2539

: 63.5 mm (2.5 ) . . : 3.00 - 3.30 m (10 - 11) ..
.. : 63.5 rnrn (2.5 ) . . :4.80-5.20 m (16- 17) .. : 50 rnrn (2 ) . I : 3.60 - 4.00 m (12 - 13)
.. : 50 rnrn (2) . . : 3.00 - 3.30 rn (10 - 11 )
: 4.1 rnrn to 57.0 rnrn .. : 50 rnrn (2) . . : 2:40- 2.70 rn (8 - 9)

• Overall length
• Diameter
  Pole dimensions ;
  Ditto as Item 1, but
• Overall length
• Diameter
  Pole dimensions ;
  Ditto as Item 1, but spliced pole
• Overall length
• Diameter
  Pole dimensions ;
  Ditto as Item 1, but
• Overall length
• Diameter
  Pole dimensions ;
  Ditto as I tern 1, but
  range of
  For conductor diameter
• Overall length
• Diameter
  Pole dimensions ;
  II
  5 09210008
  4 09210004
  I I I 3 09210002
  2 09210001
  I I I
  v
  ~
  swivel for attaching to slide or lever supports, with : less than 75 kV per foot for 5 minutes. The tong has a butt or equivalent insulation material, having withstand voltage not Wire Tong, hook type tong head. Pole shall be made of Epoxiglas
  .,-.-.
  1 I 092 10000 I No. pc(s)
  Item I Material Quantity I Description
  PEA
  C3 S..cMd uk_ of_ de.lailed_~mt RWf\1-0oct Specification No.: R- 133/2540 cgy I
  Invitation to Bid No.:
• 4 -
  r
  . Ditto as Item 12, but for 63.5 mm (2.5 ) pole diameter.
  rope nngs.
  separated into two(2) halves and shall be provided with hinges and " Wire Tong Band, for 50 mm (2) pole diameter. The band can be
  not less than 360 kg.
  . Wire Tong Saddle Extension, size 100 mm (4 ), tested working load
  to the wire tong saddle.
  Wire Tong Saddle Clevis, for attaching the butt ring of the wire tong
  tested working load not less than 220 kg.
  Wire Tong Saddle, cross-arm type, adjustable for cross-arm section : . . . . range of 100 mm x 100 mm (4 x 4) to 120 mm x 120 mm (5 x 5 ),
  ’ saddle shall be able to support load not less than 450 kg. Wire Tong Saddle, pole type, with wheel tightener, less clamp. The
  ’ ’ - Overall length : 4.20 - 4.50 m (14 -15) Pole dimensions ; . - Diameter : 63.5 mm (2.5 )
  Ditto as I tern 1, but
  ’ ’ - Overall length : 3.60 - 4.00 m (12 - 13) Pole dimensions ; . - Diameter : 63.5 mm (2.5 )
  Ditto as Item 1, but
  II
  13 09210101
  12 09210121
  11 09210122
  U 1o 09210117
  9 09210108
  8 09210119
  7 I 09210010 I I _./
  I I I
  6 09210009 I No. pc(s)
  Item I Material Quantity I Description PEA
  C3 Skh.edule of taid_r:_eq_u_i.r_enrent
  Specification No.: R- 133/2540
  Invitation to Bid No.:
• 5 -
  ~
  Il
  v
  C3 SWe.._d_ul~ QUI.e taile.d_require.mmt
  Specification No.: R- 133/2540
  Invitation to Bid No.:
  . 6 .
  •
  ’ ’
  e of : .. ……… mm to ………. mm
  ductor diameter
  verall length : …… ……………. …….. .. mm
  iameter : ………………………….. mm
  mensions ;
  ching to slide or lever supports, with :
  … kV per foot for …….. minutes. The tong has a butt swivel
  ivalent insulation material, having withstand
  voltage
  ong, hook type tong head. Pole shall be made of Epoxiglas
  e of : ……….. mm to ………. mm
  ductor diameter
  verall length : ………………………….. mm
  iameter : .. ……………. …….. …… mm
  mensions ;
  ching t? slide or lever supports, with :
  … kV per foot for .. … … minutes. The tong has a butt swivel
  ivalent insulation material, having withstand
  voltage
  ong, hook type tong head. Pole shall be made of Epoxiglas
  attached) attached)
  Description
  pc(s)
  & conditions
  & conditions
  Quantity (See details (See details
  Date:
  Unit Cost
  Total Cost
  Bid No.:
  Bidder:
  Country of origin :
  Trade-mark :
  ( - 7 -
  :
  … kV per foot for .. …… minutes. The tong has a butt swivel
  ong, hook type tong head. Pole shall be made of Epoxiglas
  …………… kV per foot for …….. minutes. The tong has a
  xiglas or equivalent insulation material, having withstand
  iameter
  verall length
  e of
  ivel for attaching to slide or lever supports, with :
  ductor diameter
  ching to slide or lever supports, with :
  ductor diameter
  ameter
  ivalent insulation
  ng, hook type tong head, spliced pole. Pole shall be made
  of
  erall length
  ensions ;
  ensions ;
  l
  Description
  material, having
  :· …… ….. mm to .. .. .. …. mm
  ……. .. .. … .. …. ……. ….. mm
  .. ……… mm to ………. mm
  …… .. … ………… .. ……. mm
  .. …… …. ……….. … …… mm
  …… ………………….. . .. ffiiTl

withstand

voltage
Bidder:
Date:
Trade-mark :
Country of origin :
Bid No.:
,facturer :
Quantity
pc(s)
I
attached) attached)
& conditions & conditions
(See details (See details
Unit Cost Total Cost
of : ……. …. mm to .. .. .. .. .. mm
uctor diameter
erall length : .. …………… …… ……… mm
meter : .. .. .. …… ………. ………. mm
ensions ;
hing to slide or lever supports, with :
kV per foot for .. …. .. minutes. The tong has a butt swivel
valent insulation material , having withstand voltage
ng, hook type tong head. Pole shall be made of Epoxiglas
of : …. ……. mm to ………. mm
uctor diameter
erall length : .. ………………….. ……. mm
meter : .. .. .. .. …. .. .. .. ………….. mm
ensions ;
hing to slide or lever supports, with :
. kV per foot for .. …… minutes. The tong has a butt swivel
valent insulation material, having withstand voltage
ng, hook type tong head. Pole shall be made of Epoxiglas
Description
pc(s)
Quantity
Date:
Bid No.:
Bidder:
Country of origin :
Trade-mark :
(_

• \l -
  /acturer :
  attached) attached)
  & conditions & conditions
  (See details (See details
  Unit Cost Total Cost
  uivalent insulation
  ng Saddle, pole type, with wheel tightener, Jess clamp. The
  … kV per foot for …….. minutes. The tong has a butt swivel
  mensions ;
  ong, hook type tong head. Pole shall be made of Epoxiglas
  ng Saddle, cross-arm type, adjustable for cross-arm section
  .. …… .. .. mm x .. .. .. .. .. .. mm to …. .. .. .. .. . mm x .. . .. …….. mm,
  re tong saddle.
  e of
  verall length
  iameter
  ching to slide or lever supports, with
  all be able to support load …. .. .. ….. kg.
  ductor diameter
  rking load ……………. kg.
  g Saddle Clevis, for attaching the butt ring of the wire tong
  c
  Description
  material, having
  : ……….. mm to …….. .. mm
  …….. .. ……………… … . mm
  .. …… …………………… mm
• 10 -
  withstand
  voltage
  Date:
  Trade-mark :
  Country of origin :
  Bidder:
  Bid No.:
  Tacturer :
  Quantity
  pc(s)
  I
  attached) attached)
  & conditions & conditions
  (Sec details (See details
  Unit Cost Total Cost
  tem 14, but size 76 mm (3 ).
  tem 14, but size 63.5 rnrn (2.5 ).
  "
  wire tongs used as side braces.
  "
  g Pole Clevis, size 50 mrn (2 ) , for engaging the butt rings
  tem 12, but for 63.5 tnm (2.5 ) pole diameter.
  "
  s.
  "
  into two(2) halves and shall be provided with hinges and
  g Band, for 50 mrn (2 ) pole diameter. The band can be
  "
  …… .. …. kg.

ng Saddle Extension, size ……… .. …….. mrn, tested working
Description
pc(s)
Quantity
Date:
Bid No.:
Bidder :
Country of origin :
Trade-mark :
c ‘acturer :

• 11 -
  attached) attached)
  & conditions & conditions
  (Sec details (See details
  Unit Cost Total Cost
  Q
  SEPTEMBER 1990
  1500 lb. 2" - 2000 lb. 2W’ - 2500 lb. and 3" - 3000 lb.
  A. B. CHANCE COMPANY- CENTRALIA, MISSOURI analysis must be made to determine the load.
  12’’ -
  values with a safety factor of more than two are: 11
  load. This does not apply to hilltop structures where special
  lb.2’h"- 1500 ft.-lb. 3"- 2500 ft.-lb. The tensile strength of more than two, are: 1 w· - 375 ft.-lb. 2" - 900 ft.- manner shown. The cantilever values, with a safety factor a pole deflection of approximately one inch when used in the working loads given for Epoxiglas Wire Tongs are based on (3) EPOXIGLAS"’ WORKING LOADS - The maximum
  larger Wire Tong.
  double Wire Tongs with double-type lever lift, or use a table for a particular Wire Tong, it will be necessary to use When the working load is greater than that given in the
  weight of the span on each side as the maximum working than neighboring poles, it may be sufficient to use the total impractical or unnecessary and a pole is slightly higher an analysis in determining the load. When calculations are (2) WORKING LOADS- Any elevated structure requires
  pole.
  Wire Tongs when load is properly applied in line with the is 800 pounds. The Lever Lift will exceed the strength of (1) SUPPORTS-Maximum recommended load for Saddles
  NOTE:
  For suggested minimum clearances for hot line tools on various system voltages see page 78-2
  “A” and therefore the less load it can support.
  Based on Tong “B” substantially horizontal. The lower the top saddle is placed below the conductor level, the greater the strain on Tong
  12 X 12 1'12 X 10 Lever Lift 475 4/0 1200 4/0 500 - 21
  2 2 X 12 1'12 X 10 Saddles 275 4/0 700 4/0 300
  12 X 12 1'12 X 10 Lever Lift 475 4/0 1200 4/0 500 21
  1 2 X 12 1'12 X 10 Saddles 275 4/0 700 4/0 300 A B Support Conductor) Size Span Size Soan No. Epoxiglas Type (lb. per ACSR Co ‘per Figure Pole Dia. (Inches) Working Load (In Feet) (Level Ground) Maximum Maximum Wire Size and Span
  ~
  •
  WORKING LOADS FOR CHANCE WIRE TONGS
  band on lift stick.
  Figure 2 - Wire Tong with saddles and swivel wire tong WEIGHT
  these pages.
  load. Four popular methods of application are shown on •
  clamp on holding stick.
  Figure 1 - Wire Tongs with saddles and wire tong blocks
  WEIGHT
  u
  ’
  proper Wire Tongs for a particular application and greatest The following information is intended to aid in selecting the
  !liEllJ 78-3
  WIRE TONG APPLICATIONS
  •
  A. B. CHANCE COMPANY- CENTRALIA, MISSOURI 1500 lb. 2"- 2000 lb. 21f2’’ - 2500 lb. and 3"- 3000 lb.
  SEPTEMBER 1990
  analysis must be made to determine the load.
  12" -
  values with a safety factor of more than two are: 11
  load. This does not apply to hilltop structures where special
  21f2’’ - 1500 ft.-lb. 3" - 2500 ft.-lb. The tensile strength of more than two, are: 1 W’- 375 ft.-lb. 2"- 900 ft.-lb . manner shown. The cantilever values, with a safety factor a pole deflectionofapproximatelyoneinch when used in the working loads given for Epoxiglas Wire Tongs are based on (3) EPOXIGLAS<t WORKING LOADS - The maximum
  larger Wire Tong.
  double Wire Tongs with double·type lever lift, or use a table for a particular Wire Tong, it will be necessary to use When the working load is greater than that given in the
  weight of the span on each side as the maximum working than neighboring poles, it may be sufficient to use the total impractical or unnecessary and a pole is slightly higher an analysis in determining the load. When calculations are (2) WORKING LOADS-Any elevated structure requires
  line with the pole.
  the strength of Wire Tongs when load is properly applied in with extensions, is 800 pounds. The Lever Lift will exceed (1) SUPPORTS-MaximumrecommendedloadforSaddles
  NOTE:
  For suggested minimum clearances for hot line tools on various system voltages see page 78·2
  With max. lift of 5’ above saddle, max. unbalance of 225 lb. on one side.
  /2 X 12 2x8 2x8 Saddles 225+ 4/0 550 4/0 230
  12 X 12 Ph Lever Lift 1000 397.5 1150 250 R!\0
  4 21 21
  3 2 X 12 Ph 350 4/0 850 4/0 375 A B c Support Conductor) Size Span Size Soan No. Epoxiglas Type (lb. per ACSR Coi•per Figure Pole Dia. (Inches) Working Load (In Feet) (Level Ground)
  •
  Maximum Maximum Wire Size and Span
  WORKING LOADS FOR CHANCE WIRE TONGS
  •
  lifted at once.
  Figure 4- Three Phase Lift Set where all three wires are
  6’
  I
  5’
  used on heavy conductors.
  Figure 3-Wire Tongs, lever lift, link stick, and rope blocks WEIGHT
  WIRE TONG APPLICATIONS
  70·4 1811
  -;)· .’,>..;. ….. :···i·.. ·,.. -’.· • . ;.. •. : ‘"’’ ,, -< •
  .il.:""" ·~ — =- ..:i-~~~1~,.."-·)~~"—,~~~~~}t’\ -’:"’"· .–.
  SEPTEMBER 1990
  A. B. CHANCE COMPANY- CENTRALIA, MISSOURI
  H4677-14 2’/2’’ X 14’ 14’ 10" 1.50" 2.88" 25 lbJ11.3 kg. —– - H4677-12 2'12’’ X 12’ 12’ 10" 1.50" 2.88" 23 lbJ10.4 kg. C400-1072 3" X 14’ 14’ 10" 0.16" 2.25" 35 lbJ15.9 b. C400-0171 3" X 12’ 12’ 10" 0.16" 2.25" 30 lbJ13.5 k. H4647-16 Spliced 2'12" x 16’ 17’ 2" 0.16" 2.25" 28 lbJ12.6 k. H4647-14 2’/2’’ X 14’ 14’ 8" 0.16" 2.25" 20'12 lbJ 9.2 kg.
  12 lbJ 8.3 kg.
  H4647-12 2112" X 12’ 12’ 8" 0.16" 2.25" 181
  H4645-8
  /2 lbJ 7.4 - ’
  H4647-10 2112" X 10’ 10’ 8" 0.16" 2.25" 161
  H4646-12 2" X 12’ 12’ 8" 0.16" 2.25" 14 lbJ 6.3 kg. ’ H4646-10 2" X 10’ 10’ 8" 0.16" 2.25" 12 lbJ 5.4 kg. H4646-8 2" x 8’ 8’ 8" 0.16" 2.25" 11 lbJ 5.0 k. H4645-10 11f2 X 10’ 10’ 7'12’’ 0.16" 2.25" 8 lbJ 3.6 kg. H4645-8 1'12 X 8’ 8’ 7112" 0.16" 2.25" 7 lbJ 3.2 k.
  No. & Length Length Min. Max. Weight Catalog Pole Dia. Overall Wire Size Approx.
  application, see pages 7B-3 and 7B-4 (Note 3).
  For working loads of Chance Wire Tongs as an aid to selecting the proper size for a particular
  two sizes of tongs where extremely large conductors are encountered.
  a position beyond the minimum working clearances (see page 7B-2). A large head is available on The wide range jaws on the head can be clamped tightly on the conductor by turning the stick from
  aluminum alloy, separated by bronze wear rings.
  Chance Wire Tongs are made with Epoxiglas"’ poles. The castings are made of heat treated specifically to the mechanical requirements f various maintenance jobs.
  A whole family of clamps, attachments, saddles and lever lifts allow the wire tongs to be adapted brace pole or ladder positioning guides.
  tures, all types of suspension insulator lines, as auxiliary arm braces, and in EHV construction for working area, for flat crossarm and/or ridge pin-construction, on horizontal post insulator struc Chance Wire Tongs have many applications for moving and holding’live conductors clear of the
  WIRE TONGS
  ‘–./
  \
  v
  ljlJ:::::::::"’’ liTTI’’ :Jilil:iliii l 78" 5
  •
  A. B. CHANCE COMPANY -CENTRALIA, MISSOURI
  . M47!~_1 2'12" PI• lbJ.08 kg. M4745 2" 1'12 lbJ.07 ~ Cat. No. For Pole Dia. We!ght
  kinking of the conductor.
  permit the tongs to assume correct positions, there is no hooked on the conductor, and since the clevis pivots to hooked into the clevis attachment, there is only one tong attaching the swivel to the lift tong and the holding tong on the lift tong and pulls outward on the holding tong. By may kink, because the weight of the conductor pushes down tor, that portion of the conductor between the tong heads
  When two wire tongs are hooked side-by-side on a conduc WIRE TONG SWIVEL
  M4743 1 ‘12’’
  Cat. No. For Pole Dia.
  in pulling heavy conductors back in position. force of the pull in line with the top wire tong … assisting ring of the clamp. This method of application places the wire tong under tension. Rope blocks are connected to the with pole. The Wire Tong Blocks Clamp is secured to the The Chance Wire Tong Blocks Clamp where pull is in line WIRE TONG BLOCKS CLAMP
  SEPTEMBER 1990
  •
  la lbJ0.8 kg.
  M1729-2 3" 1 7
  M1729-1 2'12" PI• lbJ0.8 kg. M1729 2" Pia lbJO. 7 kg. M1729-3 1'12" 1'12 lbJO. 7 kg. Cat. No. For Pole Dia. Weight
  class (see table on page 7B-2).
  install the band the minimum distance or more for voltage positive insulation between rope blocks and live conductors, wire tong when the tong is supported by rope blocks. For The hinge ring slides on the band, permitting rotation of the separated by a sliding action without removing the screws. opposite half, permitting the halves of the band to be threaded into a half of the band and engages a slot in the Two screws clamp the band to the wire tong. Each screw is WIRE TONG BAND
  BAND
  TONG
  WIRE
  !;
  ~
  ~ . [] .
  C400-0345 3" 3'1• lbJl. 7 kg. M1728-5 2'12" 2'12 lbJl.l kg. M1728-4 2" 2'1• lbJl.O kJ(. Cat. No. Size Weiuht
  14 ozJ 3 kg. Weight
  M4740-14 Wire Tong Saddle Clevis Cat. No. Description
  _./1 has been secured to the pole.
  •
  butt rings of the two wire tongs used as side braces . tong supporting an auxiliary crossarm, and engages the The Wire Tong Pole Clevis clamps around the vertical wire
  •
  WIRE TONG POLE CLEVIS
  rm stirrup. Thus the wire tong can be attached after the . . . so the wire tong can be pivoted to engage the wire tong as a brace for an auxiliary crossarm, to a wire tong saddle This clevis is used to attach the butt ring of a wire tong, used
  8·6 iiml
  WIRE TONG SADDLE CLEVIS
  J:J/!!} r·. . -, •• • ~ •• ’ .. .·u…-.-:<·=;’-·
  A. B. CHANCE COMPANY- CENTRALIA, MISSOURI SEPTEMBER 1990
  M4741-5 3" (75mm) pole clamp only 2lb. 12 ozll.25 kg. M4741-3 2W’ (62.5mm) pole clamp only 2lb. 9 ozll.20 kg. M4741-2 2·· (50mm) pole clamp only 2lb. 5 ozll.04 kg. M4741-1 1W’ (37.5mm) pole clamp only 2lb. 1 oz10.93 kg. C400-0073 Wire Tong Saddle Extension 1lb. /0.45 kg. M4740-20W Saddle, Tightener, extension less clamp 9lb. /4.08 kg. M4740-19W Saddle, Tightener, 3" (75mm) clamp & extension 11lb. 12 oz15.33 kg. M4740-18W Saddle, Tightener, 2W’ (62.5mm) clamp & extension 11 lb. 9 oz./5.24 kg.
  M4740-17W Saddle, Tightener, 2" (50mm) clamp & extension 11 lb. 5 oz15.13 kg. M4740-16W Saddle, Tightener, 1'12’’ (37.5mm) clamp & extension 11lb. 1 oz15.01 kg. M4740-15W Saddle Wheel Tightener and Clevis 6 lb. 11 oz13.03 kg. M4740-10W Saddl and Tightener less clamp Slb. /3.60 kg. M4740- 9W Saddle and Tightener and 3" (75mm) clamp 10 lb. 12 ozJ4.90 kg. M4740- 5W Saddle and Tightener and 2W’ (62.5mm) clamp 10 lb. 9 oz./4.80 kg. M4740- 4W Saddle and Tightener and 2" (50mm) clamp 10 lb. 5 ozl4.68 kg. M4740- 3W Saddle and Tightener and 1 W’ (37.5mm) clamp 10 lb. 1 oz14.56 kg. Catalog No. Description Approx. Weight
  and C400-0073 Extension.
  Shown above are M4741-1 Pole Clamp,
  places such as between crossarm braces, under guy wires, etc. The Wheel Tightener has the advantage of being able to fit into close
  v
  in place, and prevent riding down and excessive play. tJ
  The Wheel Type fasteners are easy to apply, hold the saddle firmly
  •
  Easily Applied
  Tong Saddle Extension can be easily bolted to the saddle. This heat treated aluminum-alloy extension is 4 inches (100mm) long and has a tested working load rating of 800 pounds (360kg).
  for most jobs. Where additional clearance is required, the Chance Wire
  The clamp is set far enough away from the base to give ample clearance
  Chance Pole Type Wire Tong Saddles are made of lightweight alumi- num for handling ease. These rugged heat-treated saddles will support a maximum of 1000 pounds (450kg) without the extension .
  Strong Aluminum Alloys
  M474Q-20W
  u
  M4740-10W M474Q-16W M4740-3W

---

WIRE TONG SADDLES j)I
•
A. B. CHANCE COMPANY -CENTRALIA, MISSOURI
Bracket with wheel. tightener and 36" Chain
Description
rings. Bracket has a maximum total working load of 1,000 pounds . lines to this bracket, mounted at the base of the pole to the six different An easy way to prevent line snarls by snubbing all hand or light block
ROPE SNUBBING BRACKET
T400-1413 Tower Saddle w/small and large hooks 13.25 lb16 kg. L___ M4742 Tower Saddle Less Clamp w/small hooks 11.25 lbJ5.1 kg. Catalog No. Description Weight
pole clamps, shown on page 7B-7.
pivot with the wire tong or boom pole. Saddle shown does not include through the pivot lug permits rope blocks to be fastened so that they will iron tower leg by four hooks tightened by wing nuts. A clevis which bolts
or boom poles on towers. The saddle is securely fastened to the angle The Chance Tower Type Wire Tong Saddle is used to support wire tongs
TOWER TYPE SADDLE
3" X 41/4 to 4" X 8"
Fits Crossarms
is 500 pounds.
does not include pole clamps, shown on page 7B-7. Maximum work load
M1846W
M4742
SEPTEMBER 1990
~
M4744
the wire tong … in any direction … and without binding. Saddle shown • a universal-joint action which allows complete freedom of movement of pivoting action of the saddle swivel and pole clamp attachment provides when working space is limited or crowded with pole saddle(s). The The Chance Crossarm Wire Tong Saddle is used on underbuilt arms
CROSSARM TYPE SADDLE
/2 lbJ1.8 kg.
70358 Wheel Tightener Only 31
M1847-6 72" Extension Chain 6 lb12.8 kg. Ml847-4 48" Extension Chain 4 lbl1.9k M1847-3 36" Extension Chain 3 lbl1.4k
Ml847 18" Extension Chain 1’/a lbJ .7 kg. M1848W Wheel Tilrhtener Assembly (36" Chain) 5'1• lb12.6 kg. Catalog No. Description Weilrht
diameter poles.
increases length of the Chain Tightener so it can be used on large
u
M1848W
•
Maximum workload is 2,500 pounds for both tools. Extension Chain
take-up.
. .. prevents riding down and excess play. Wheel tightener has spring tightening action makes a tool easy to apply … holds it firmly in place For building wire tong holding assemblies, or for replacement. Wheel
CHAIN TIGHTiiNERS & EXTENSIONS
•.
4’ !· ••’ …
,,_·, ,· .. ,., –· -.-· —– :!.
·8 ~
SEPTEMBER 1990 C400-1016
A. B. CHANCE COMPANY- CENTRALIA, MISSOURI
Lever Lift 8.6 kg.
C400-1017 Epoxiglas Double 750 lbs. 19lb./
Lever Lift 8.1 kg.
C400-1016 Epoxiglas Single 1000 lbs. 18 lb,/
No. Description Per Tong Weight
Catalog Load
Working
sameworlcingload pertongasin the aluminum units. The Epoxiglas member is 36" long and provides the
tongs.
convert a single lever lift into a double lift for tow wire arbor adapter (M4760-2) shown above can be used to single and double type units are available, and the have a total conductor lift of 36 inches. Both more lifting space is required. The Epoxiglas units normally used on higher transmission voltages where same application as the aluminum base units, but are Epoxiglas Lever Lift Wire Tong Supports have the
Epoxiglas® Base
J
.8 kg.
M4760-2 Arbor Adapter - 1'1. lbl
Lever Lift 7.0 kg.
M4760-1W Double Type 750 lb. 15'12 lbl
Lever Lift 6.5 kg.
M4760-2
12 lbl
M4760W Single Type 1000 lb. 141
~ (
Double Type
M4760W
No. Description Per Tong Weight
Catalog Load
Working
freedom of movement.
the same pin that holds the wire tong(s), permitting Lift for attaching the lower rope blocks, will rotate on rope blocks. The clevis, used at the end of the Lever Each Lever Lift is equipped with a clevis for attaching
Type Lever Lift to a Double Type when desired.
An arbor adapter is available to convert the Single can be attached at virtually the same height.
Lifts are required, one at each side of the pole, they will support any size of wire tong. When two Lever provide a total conductor lift of 203
/• inches, and
V Made of a high strength aluminum alloy, these lever
Lifts are light in weight … and easy to handle. They
replace wing nuts.
rings of the two wire tongs on the shaft extensions and the Double Type, remove the wing nuts, slip butt the shaft through, and replacing the cotter key. For placing the butt ring of the tong into the fork, shooting removing the cotter key, sliding the shaft to the side, A wire tong is attached to the Single Type by simply
Tong Saddles where loads exceed 500 pounds.
practice, the Lever Lift should be used in place ofWire or lowering conductors with wire tongs. As a general heavy suspension insulator construction for raising worlcing space on the pole is limited, or on H-frame or Lever Lift Wire Tong Supports are employed where Aluminum Base
,78-9
WIRE TONG SUPPORT LEVER LIFT
-4-
invitation to Bid No. :
Specification No.: RHOT-003/2547
C3 Schedule of detailed requirement PEA
Item Material Quantity Description No.
1 09200011
pc(s) Clamp stick, grip- all type, plastic head, with:
Pole, withstand voltage
Overall length
Diameter
made of Epoxiglas or equivalent insulation ~
material, having withstand voltage not less than 75 kV per foot for 5 minutes 2.4 m- 2.7 m (8’- 9’)
31 mm (1 W’)
2 09200013 3 09200015
···· t /1
Il
It houses the jaws inward in closed position and releases the jaws outward in open position which are controlled by safety - lock lever on the handgrip. The insulated operating rod shall be outside the main pole.
pc(s) Ditto as Item 1, but :
Overall length 3.6 m-4.0 m (12’ -13’)
pc(s) Ditto as Item 1, but :
Overall length 1.2 m-1.5 m (4’- 5’)
Manufa
-5-
Trade-CountryBidder:
Bid No.:
Date·
Description
Clamp stick, grip - all type, plastic head, with : Pole, withstand voltage ………………………………….
………………………………….
……………………………………
It houses the jaws inward in closed position and releases the jaws outward in open
position which are controlled by safety - lock lever on the handgrip. The insulated
clamp stick, grip - all type, plastic head, with :
………………………………….
·······································
·······································
It houses the jaws inward in closed position and releases the jaws outward in open
position which are controlled by safety - lock lever on the handgrip. The insulated
:)
Invitation to Bid No.:
Specification No. : RHOT-003/2547
C4 Price schedule
Catalogue PEA
Item
No. Material
No.
09200011 1
Overall length
Diameter
operating rod shall be outside the main pole.
09200013 2
Pole, withstand voltage
Overall length
Diameter
.,
operating rod shall be outside the main pole.
I
u:
Manufa
Trade-CountrBidder:Bid No.
Date·
It houses the jaws inward in closed position and releases the jaws outward in open
position which are controlled by safety - lock lever on the handgrip. The insulated
l -6-
J

Invitation to Bid No. :
Specification No.: RHOT-003/2547
C4 Price schedule
Description
Catalogue PEA
Item
No. Material
No.
Clamp stick, grip - all type, plastic head, with : Pole, withstand voltage ………………………………….
09200015
3
·······································
Overall length
…………………………………..
Diameter
operating rod shall be outside the main pole .
.
’
!
IE
’
Invitation to Bid No.:
Specification No.: R-130/2539
CS Sdtedule of detailed requirement
PEA
Item Material Quantity
Description
No.
1 09200001
2 09200003 3 09200005
4 09200006 5 09200007
set(s) TIE STICK, with rotary prong head and universal end. Pole shall be made of Epoxiglas or equivalent material, having withstand voltage not less than 75 kV per foot for 5 minutes, dimensions of 2.4 m - 2.7 m (8’ -9’) in overall length and 31 mm ( 1 l/4") in diameter. A tie wire assistant shall be provided on the side· of the pole.
set(s) Ditto as Item 1, but rotary blade head and universal end.
pc(s) Tie stick head, ftxed prong. type. To be used with the universal pole for manipulating tie wires with looped ends.
pc(s) Tie stick head, fixed blade type. To be used with the universal pole for manipulating tie wires with or without looped ends.
pc(s) Tie stick head, rotary prong type. To be used with the universal pole for placing insulator tie with looped ends.
n:;
Trade-mark :
• 5-
Country of origBidder:
Bid No.:
Date:
QuaDescription
’
Tie stick, with rotary prong bead .and universal end.
Tie stick, with rotary blade head and universal end.
Tie stick· head, fixed prong type.
Tie stick head, fixed blade type.
Tie stick head, rotary prong type.
Invitation to Bid No.:
Specification No.: R-lS0/2539
C4 Price schedule
PEA
Catalogue
Material
Item
No.
No.

09200001 1

09200003 2

09200005 3

09200006 4

09200007 5

.m

• 4 -
  f -:- … . ~ .. -~~ :’’ -:::-:>-._ ~ ··:+::. ‘· ·,:· \
  fnvitation to Bid No.

Specification No.: R-182/2536  
C3 Schedule .91 detailed requirement ;) I '"'I r-.,C/ (..,  
--------------------------------------------------------------------;-::~~-::..~~~~:-~-----------·l PEA I l  Item l Material l Quantity l Description  
l No. l l  
------:----------:----------·-----------------------------------------------------------~-·1  
9461  
2  
I I pc(s) UNIVERSAL POLE, with two (2) splines. Pole shall be  made of Epoxiglas or equivalent insulation aaterial,  having withstand voltage not less than 75 kV per foot  for five (5) minutes, dimensions of 2.4 a- 2.7 a  
(8'- 9') in overall length and 31 ma (1 1/4") in  
diameter. A tie wire assistant shall be provided on  the side of the pole. \  
pc(s) Ditto as Item ~. but dimensions of 3.6 m - 4.0 a  (12'- 13') in overall length and 31 am (1 1/4") in  
diameter.  
• 
II  
/ 
)  
Manufacturer: 
 5 - 
-
Trade-mark:  
Country of Origin:  
Bidder:  
Bid No.:  
Date:  
--------:-------- ---------:---------------------------------------------------------------I I I I •  
/. 
Description 
\,  
j' 
) 
Invitation to Bid No. :  
Specification No.: R-182/2536  
C4 Price schedule  
: 
PEA : 
lMaterial Catalogue: l No. No. : Item 
: : 
·I  
I  
IL  
- 4 - 
Invitation to Bid No.: ··.. .., ·:'•.'':~·  
' ~.  
Specification No.: R-288/2536 ~CQ)uQ)W' -~  
·. ··-·"""'  
C3 Schedule of detailed requirement  
P' \ ""'{ ,, I  
______________________ . ___________________________________________ ...;.c-1··_:_~_-.=,Q~::...t:. _______________   
: PEA :  
Item : Material l Q.uanti ty : Description  : No. : :  
--------:----------:------------:~---------------------------------------------------------- 1 : : pc(s): WIRE-HOLDING STICK. To be used on energized lines. Pole  shall be made of Epoxiglas or equivalent insulation  
material, having withstand voltage not less than 75 kV  
per foot for 5 minutes and dimensions of 2.4 m-2.7 m  
(8' - 9') in overall length and 1 1/4" in diameter. The  
head locks in three (3) stop positions by a knurled screw  
handle. The gripper, equipped with an eye so that other  
sticks can assist, shall be designed to handle conductor  
up to 0.95" in diameter • 
. I I  
I.  
I  
II  
) ' ' 
5 - 
Manufacturer: 
Trade-mark: Country of Origin:  
Bidder:  
Bid No.:  
Date:  
---------------------------------------------------------------------------------------------I  
Description 
-
J 
Invitation to Bid No. : 
Specification No.: R-288/2536 
C4 Price schedule 
I  
lMaterial!Catalogue! 
I  
: 
: 
PEA I 
Item 
No. 
I 
No. 
I  
I 
1 
I 
'I  
I  
I  
I  
I  
,I  
II  
  

-4;.  
' Invitation to Bid No. :  
Specification No. : R,.lS0/2547  
C3 Schedule of detailed requirement  
PEA  
Description  
Item Material Quantity  
No.  
1 09200140 pc(s) Cable cutter, ratchet type, for cutting ACSR, with :  
2 09200141  
Pole, withstand voltage  
Overall length of pole  
Diameter of pole  
Cutting capacity  
pc(s) Ditto as Item 1, but  Overall length of pole  
made ofEpoxiglass or equivalent insulation  material, having withstand voltage not less  than 100 kV per foot for 5 minutes,  according to ASTM standard ·    
!.8m-2.1 m(6'-7')  
35 mm- 40 mm (1.38"- 1.58")  
for ACSR not less than 24 mm (0.953"), or  556MCM  
2.4 m- 2.7m (8'- 9')  
:t: 
IL  
~·. ,. ..~  
· .. :~  
-5- 
Invitation to Bid No.:  
Specification No. : R-180/2547  
C3 Schedule of detailed requirement  
PEA  
Item Material Quantity  
Description  
No.  
3 09200165 pc(s) Cable cutter, ratchet type, for cutting aluminium conductor, with :  
!,;~  
'\  
.4 09200163  
Pole, withstand voltage  
Overall length of pole  
Diameter of pole  
Cutting capacity  
pc(s) Ditto as Item 3, but  Overall length of pole  
made of Epoxiglass or equivalent insulation  material, having withstand voltage not less  than 100 kV per foot for 5 minutes,  according to ASTM standard    
1.8 m- 2.1 m (6' -7')  
35 mm- 40 mm (1.38"- 1.58")  
for aluminium conductor (size 400 mm2)  not less than 25.65 mm  
2.4 m- 2.7 m (8'- 9') 
11  
Manu
-6- 
TradeCountBiddBid N
Date· 
Description 
Cable cutter, ratchet type, for cutting ACSR, with : Pole, withstand voltage . . ......................................................  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . .  
: ....................................... m (. ........ .')  
: .................................... mm ( .......... ")  
") : .................................... mm ..........  
( . 
. ·······················································  
Cable cutter, ratchet type, for cutting ACSR, with : Pole, withstand voltage  
........................................................  
: ....................................... m ( ......... .')  
: .................................... mm ( .......... ")  
: ........................•........... . mm ( .......... '')  
\)  Invitation to Bid No.: 
Specification No. : R-180/2547 
C4 Price schedule 
PEA  
Catalogue 
Material 
; 
No. 
No. 
09200140 
Overall length of pole 
Diameter of pole 
Cutting capacity 
09200141 
Overall length of pole 
Diameter of pole 
Cutting capacity 
.  
I II  
Item 
1 
2 
. -·· 
:J' Manu-7- 
,'')' \,, ' 
TradeCountBiddeBid N
Date· 
Description 
i 
Cable cutter, ratchet type, for cutting aluminium conductor, with : Pole, withstand voltage .........................................................  
........................................................  
: ....................................... m( .......... ')  Overall length of pole 
: .................................... mm(. ......... ")  Diameter of pole 
: .................................... mm (. ......... ")  Cutting capacity 
Cable cutter, ratchet type, for cutting aluminium conductor, with : Pole, withstand voltage ........................................................  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... . . . . . . . . . . . .  
: ....................................... m(. ......... ')  Overall length of pole 
: .................................... mm (. ......... ")  Diameter of pole 
: .................................... mm (. ......... ")  Cutting capacity 
Invitation to Bid No.: 
Specification No.: R-180/2547 
C4 Price schedule  
- 
PEA  
Catalogue 
Material 
No. 
No. 
09200165 
09200163 
II'  
Item 
3 
4 
....... _. 
- 4-,--.,, .. ..., ... ,,~ .. ,_~, ,,., ....... ~-~- 
! ~CQJ[F)W I 
..__~-----.....__-~~ Invitation to Bid No.  Specification No.: R-181/2637  
C3 Schedule o1' detailed requirement  
l PEA f I  
Item I Material l Quantity I  
No. Descr lp.t ion  
-----. 1------------ 1---------- l----------·-------------------------------------------------- .1 I 9408 pc(s} I WIRE CIJTTF.R, lever type, for medi.um duty. Pole shall  
I .be made of Epoxiglas or equivalent insulation material,  
having withstand voltage not less than 75 kV per foot  
for 5 minutes, dimensions of l.B m- 2.1 m {6'-7')_ in  
overall length and 38 rm11 (l 1/2") in diameter. Cutting  
I  
.I  
-·~.  
j,  
I  
·I I  
II  
head with blades shall be capable of cutting ACSR  I up to 14.2 mm (0.!66") in diamet.er (4/0 A.W.G.). Lever  l mechanism shall be made of solid fiberglass reinforced  . rod. and insulation-coated handle.  
pe{s)l Ditto as Item 1, but dlmensions o:f 2.4 m- 2.7 m (8'-9')  in overall length and 38 mm (1 1/2") in diameter.  
I I . 
)  
Manufacturer:  
5- 
- 
\ )  
Trade-mark:  
Country of Origin:  
Bidder:  
Bid No.:  
Date:  
-------- 1--------:--------:-----------------------------------------·--·----------------- !1 I I I I I I I II  Description 
Invitation to Bid No. :  
Specification No.:  
C4 Price schedule  
I  
I l PEA 
IMaterialiCatalogue I  
I  No. 
I  
I  
. I  
I 
I  
I  
I tern  
'~./ \ . I \  
' ;'fa WIRE CUTTER nnJfl RHOT-025  
lUinrn.hr:~otl'lJ  
2.000mm __ :;·  
j32mrn0  
fll'i1f~TU  
Lrh..~~tlw.mf1J"J~IJI'VI Hot stick i~TI1Mi'u~~~na1~1h,u1~L~n 'YI~v i~~~nn~  v~~iltilemmuJ (Tie Wire) 
Jvlt~on to Bid N~: . 4 .  Specification No.: R-13112540  
C3 Schedule of detailed requirement  
PEA  
Item MateriaJ Quantity  
No. pc(s)  
Description  
Link Stick, strain type, pole shall be made of Epoxiglas or  
1  
equivalent insulation material, having withstand voltage not less  
than 75 kV per foot for 5 minutes, with :  
2  
3  
4  
IL  
Pole diameter  
Pole length  
Jaw opening  
Working load  
Overall length  
Weight  
Ditto as Item 1, but  Jaw opening  
Weight  
Ditto as Item 1, but  Jaw opening  
Weight  
Ditto as Item 1, but  Pole length  
Overall length  
Weight  
: approximately 38 mm  
: not less than 1 ,200 mm  
:up to 26 mm  
: not less than 2,900 kgf  
: not less than 1,400 mm  
: not more than 3 kg  
:up to 38 mm  
: not more than 5 kg  
:.up to 63 mm  
: n0t more than 6 kg  
: not less than 1,800 mm  
: not less than 2,000 mm  
: not more than 4 kg  
/  
j
j 
j  
j  
j  
j  
j  
j  
j  
j  
j  
j  
j 
• 5 •  
Invitation to Bid No.:  
Specification No.: R-13V2540  
C3 Schedule of detailed requirement  
PEA  
Item Material Quantity  
No. pc(s)  
Description  
5  
0 <12't. 00~ t  
Link Stick, spiral type, pole shall be made of Epoxiglas or  equivalent insulation material, having withstand voltage not less  than 7 5 k V per foot for 5 minutes, with :  
--~;..:...-"~  \: ~~  
Pole diameter  
Pole length  
For conductor diameter  Working load  
Overall length  
Weight  
: approximately 31 mm  : not less than 1 ,000 mm  : up to 32.56 mm  
: not less than 1 ,500 kgf  : not less than 1 ,450 mm  : not more than 3 kg  
6  
\  
~  
/  
Link Stick, roller type, pole shall be made of Epoxiglas ·or  equivalent insulation material, having withstand voltage not less  than 75 kV per foot for 5 minutes, with :  
Pole diameter : approximately 31 mm  Pole length : not less than 1 ,800 mm  For conductor diameter : up to 20.25 mm  
Working load : not less than 450 kgf  !:::overall length : not less than 2,000 mm  
- 
rr  
~  
Weight : not more than 2 kg 
Manufacture
• 6 .  
(]  
,_  
Trade-mark : 
Specification No.: R-181/2540 
Country of oBidder:  
Bid No.:  
Date:  
r  
Description 
L:ink. Stick, strain type, pole shall be made of Epoxiglas or equivalent insulation  
material, having withstand voltage .......... kV per foot for ............ minutes,  
with:  
: ........................... mm  Pole diameter 
: ........................... mm  
Pole length 
: ........................... mm  
Jaw opening 
: ........................... kgf  Working load 
: ........................... mm  
Overall length 
: ........................... kg  
'  
Weight 
Invitation to Bid No.: 
C4 Price 
Catalogue 
PEA Material Item 
No. 
No. 
- 
1 
n'-
Manufacturer :  
- 7 - 
Trade-mark :  
Specification No.: R-13112540 
Country of origBidder:  
Bid No.:  
Qu
Date:  
Description 
p
Link Stick, stram type, pole shall be made of Epoxiglas or equivalent insulation  
material, having withstand voltage . .. . .. .. .. kV · per foot for .. .. .. .. .. .. minutes,  
with:  
: ........................... mm  Pole diameter 
: ........................... mm  
Pole length 
: ........................... mm  
Jaw opening 
: ........ : .................. kgf  Working load 
: ........................... mm  
Overall length 
: ........................... kg  
<  
Weight 
Invitation to Bid No.: 
C4 Price sche.d.J.lk 
PEA  
Catalogue 
Material 
Item 
No. 
No. 
- 
2 
m 
• 8 .  
)  
Manufacturer :
"J  
Trade-mark :  
Specification No.: R-181/2540 
Country of oriBidder:  
Bid No.:  
Q
Date:  
Description 
Link Stick, strain type, pole shall be made of Epoxiglas or equivalent insulation  
material, having withstand voltage .......... kV per foot for .. : ......... minutes,  
with:  
: ........................... mm  Pole diameter 
: ........................... mm  
Pole length 
: ........................... mm  
Jaw opening 
: ........................... kgf  Working load 
: ........................... mm  
Overall length 
: ........................... kg  
'  
Weight 
Invitation to Bid No.: 
C4 Price schedule 
PEA 
Catalogue 
Material 
Item 
No. 
No. 
. 
3 
II 
_)  - 9 - 
.  
Manufacturer Invitation to Bid No.: 
Trade-mark :  
Specification No.: R-181/2540 
Country of orBidder:  
Bid No.:  
Date:  C4 Price schedule 
PEA 
Description  
Catalogue 
Material 
Item 
No. 
No. 
Link Stick, strain type, pole shall be made of Epoxiglas or equivalent insulation  
- 
4 
material, having withstand voltage .......... kV per foot for ............ minutes,  
with:  
: ........................... mm  
Pole diameter 
: ........................... mm  
Pole length 
: ........................... mm  
Jaw opening 
: ........................... kgf  Working load 
: ........................... mm  
Overall length 
: ........................... kg  
'  
Weight 
u: 
() - 10 - 
) 
Manufacturer
Trade-mark :  
Specification No.: R-181/2540 
Country of oBidder:  
Bid No.:  
Date:  
Description 
Link. Stick, spiral type, pole shall be made of Epoxiglas or equivalent insulation  
material, having withstand voltage .. .. . ... .. kV per foot for .. .. .. .. .. .. minutes,  
with:  
: ........................... mm  
Pole diameter 
: ........................... mm  
Pole length 
: ........................... mm  
For conductor diameter 
: ........................... kgf  Working load 
: ........................... mm  
Overall length 
: ........................... kg  
'  
Weight 
Invitation to Bid No.: 
C4 Price scheduk 
PEA 
Catalogue 
Material 
Item 
No. 
No. 
- 
5 
m 
-11 - 
Manufacturer
Trade-mark :  
Country of orBidder:  
Bid No.:  
Date:  
.  
Description 
Link Stick, roller type, pole shall be made of Epoxiglas or equivalent insulation  
material, having withstand voltage .......... kV per foot for ............ minutes,  
: ........................... rom  
: ........................... rom  
: ........................... rom  
: .............. : ............ kgf  
: ........................... rom  
: ........................... kg  
i .--··)·. '  
' ' 
. 
\.., 
Invitation to Bid No.: 
Specification No.: R-13112540 
C4 Price schedule 
PEA  
Catalogue 
Material 
Item 
No. 
No. 
with:  
- 
6 
Pole diameter 
Pole length 
For conductor diameter 
Working load 
Overall length 
Weight 
I  
'  
Il 
. ;io LINK STICK tTtUfl RHOT-007 ITEM 1,2,3  
1Ytnnth~neu ...  
. STRAIN LINK STICK  
Item i  
' Ite.ll) j  
10; nn1{uu  
Item 1 Strain LinkStick &fl'U&tlte~jje Hot Stick ~1rfd1'Hi'1.Jff~f~ff1Vi'li4h lflvtla1tl  
~1~'H.a~'llziliJ1fl 1~f!i11tllltY1tJi't'lun~tJn1tJ6fl~1im-d~'llZil'l'b~ff1'Hf11P.;Ifll;j6fl afl1r:IN:ahfl  1116~ Strain Link Stick 'll~flfl~tlUU'Utl1.Jff1t1lTh~h  
Item 2 Spiral Link Stick tfl'W&tl~e~ije Hot Stick ~1rfdnti'11ff~f~n1vi't'14h Uflllw::tl1fl  
1~fl~tl·urla1tl11ff1tl l't'1-rl1 f1'11.11·nu~eu itl1.11 i~twnu  
Ell A a ..t,Y. o 01 ..v : '111ft.UI Item 3 Roller Link Stick 11J'W1fl"HN1.18 Hot Stick 'VI "Dfl'l'l1111fWNff1fJ nrrn Roller Link  Stick ilf!Wfi'11U~fl6 fl'11.11'.itlfl1fllfl~8U~1Vitlli111'Wff1Vi'li-r!1 l~ u9i'll::i'uJ1'HUfl i~U'evn11  Link Stick 'lh~umGu 
  

  

  

  

  

  

  

- 4 ..  
Invitation to Bid No.  
r ·"'-"''' ·' ;....'.'.", .. :. .:...:, ... ., ~ r:  
Specification No.: a-166/2536 ! ~~foJ)j ' 
... , , .. .... : 
." ~ ;- ..•... ~ -- ... ~, 
C3 Scbodule'g! detailed reauire.ent R~oi-02.o 12. 53£  ------------------------------------------------------------------------------------------ :   PEA  
Ite.  I ·Material Quantity Description  
I No.:  I  
------1----------:----------1------------------------------------------------------------­ 1   : : set(s): INSULATED HANGER. for reducing the p08sibi1ity of  10 q02 :)OO.z5: electrical shock to the line.an during installation or  t.p  claapa or juaper claaps on energized conductors up  
I to 34.5 kV. Pole .hall be lIade o'r Epoxiglas or equivalent  
,I .' inaulation .aterial, having withatand volta,e not 1.as than  75 kV per toot tor five (6) .tnutea, diMenaions of 350 •• ­ "'-"" 390 •• (14" - 16") in overall length and 31 II. (1 1/4") In  diu.ter.  
'­ 
,.,  
II 
( - 5 - (  
MaAllfacturer:  
Invitation to Bid No. : Tr~:  
Count.t7 of Origin:  
Specification No.: 8-166/3536 Bidder:  
Bid 10.:  
C4 Price schedule Date: ".;:..  ------------------------------------------------------------------------------------------------------------------------------------ : PEA 1 : : Unit. Coet : Tot&! Cost  Itell :Material:Cataloguel I (See detai Is : (Stte details  No. : No. : Description Quantit,. & conditions • condition. I I attached) attaChed) --------:--------:---------:---------------------------------------------------------------:----------~-------~------t- ------------ I I I I  I I I I  
II 
- 4 - 
Invitation to Bid No.:  
Specification No.: R-270/2536  
C3 Schedule of detailed requirement ,  
. RHD1-040 -------------------------------------------------------------------------------------------- : PEA :  Item : Material : Quantity Description  : No. J  
--------:----------:------------ ----------------------------------------------------------- 1 : / set(s) DUAL AUXILIARY ARM, for side arm or lift arm, designed  
I  
I  
, I I  
I,  
I  
for voltage up to 11 kV • The arm shall be made of  Epoxiglas or equivalent insulation material, having  withstand voltage not less than 75 kV per foot for 5  minutes, dimensions of 2.7 m- 3.0 m (9'-10') in overall  length and 63 mm (2 1/2") in diameter; complete with a  wheel binder •  
. .  
• 
IL  
( I J \ -.,.  ) 
r'p1 
 5 - 
-
Manufacturer': 
Trade-mark: - 
Country of Origin:  
Bidder:  
Bid No.:  
I  
Date:·  
I  
I  
I  
: I  Description 
1  
I  
I 
r···  
;.  
 
} 
)  
' 
\ 
' 
)  
Invitation to Bid No. :  
Specification No.: R-270/2536  
C4 Price schedule  
:  
: 
PEA : 
:Material:catalogue:  Item 
1  
No. 
No. : 
I  
I  
--------:--------·--------- 
1  
I  
..  
II  
- 4 - 
Invitation to Bid No.:  
Specification No.: R-272/2536·  
C3 Schedule of detailed requirement .  
----------------------------------------------------------------------JSIL~_I:Q~J~----------- I  I PEA  
Item : Material I  
I No.  
--------:---------- 1 :  
I I'  
Quantity  pc(s)  
Description  
INSULATOR, added to wireholders for the purpose of  upgrading tools to 33 kV.  
' ,:,  
\  
• 
I I,  
II  
/' )  
Manufacturer:  
 5 
-
') 
Trade-mark:  
Country of Origin: 
Bidder:  
Bid No.:  
Date:  
I  
I  
I  
I  
: I  Description  
I  
---------:---------------------------------------------------------------:-1 I  I  
/-··  
·1·  
I  
I 
Invitation to Bid No. 
Specification No.: R-272/2536 
C4 Price schedule 
I  
I  
Catalogue:  
No. 
I 
I. 
'I  
I  
PEA  
Material  
No.  
-------- -------- 
•  
II  
Item