• จัดหาเครื่องมือและอุปกรณ์สำหรับงานฮอตไลน์ (Hotline Tools) ที่มีมาตรฐานความปลอดภัยสูงสำหรับการปฏิบัติงานในระบบไฟฟ้าแรงสูง 22 และ 33 kV
• สนับสนุนการปฏิบัติงานซ่อมแซมและบำรุงรักษาระบบจำหน่ายของการไฟฟ้าส่วนภูมิภาคแบบไม่ต้องดับไฟ (Live Line Maintenance)
• เพื่อให้มั่นใจว่าอุปกรณ์ที่จัดหามีคุณลักษณะทางกลและทางไฟฟ้าตรงตามข้อกำหนดทางเทคนิคสากล

• จัดหาและส่งมอบชุดเครื่องมือสำหรับงานฮอตไลน์ระบบ 22 และ 33 kV จำนวน 16 รายการ ตามรายการและจำนวนในข้อกำหนดการประมูล
• ส่งมอบอุปกรณ์ให้ตรงตามมาตรฐานข้อกำหนดเทคนิคเฉพาะของ PEA (เช่น Specification No. R-410/2540, R-133/2540, RHOT-082/2560 เป็นต้น)
• ดำเนินการระบุผู้ผลิต (Manufacturer) เครื่องหมายการค้า (Trade-mark) และประเทศผู้ผลิต (Country of origin) ในเอกสารเสนอราคา

• Extension Chain (ความยาวไม่น้อยกว่า 450 มม., ทดสอบแรงดึงไม่น้อยกว่า 1,100 กก.) จำนวน 4 EA
• Pole clamp ขนาด 2" และ 2 1/2" จำนวนรวม 8 EA
• Saddle extension 4" จำนวน 4 EA
• Wire tong band ขนาด 2" และ 2 1/2" จำนวนรวม 5 EA
• Wire tong pole clevis ขนาด 2 1/2" จำนวน 2 EA
• Wire tong saddle pole type และ Clevis จำนวนรวม 9 Set / 1 EA
• Tie stick head (Fixed prong และ Rotary prong) จำนวนรวม 8 EA
• Rope snubbing bracket จำนวน 2 EA
• Hotline wire grip สำหรับสายตัวนำขนาดต่างๆ (25-50 mm2, 50-95 mm2, 95-185 mm2 ฯลฯ) จำนวนตามกำหนด
• Hoist ratchet type (Nylon strap) จำนวน 2 Set
• รายละเอียดอุปกรณ์และชุดเครื่องมือฮอตไลน์อื่นๆ ครบถ้วนตาม 16 รายการใน TOR

• อ้างอิงตามกำหนดเวลาการยื่นซองและส่งมอบพัสดุของการไฟฟ้าส่วนภูมิภาค (PEA) ในเอกสารเสนอราคาแต่ละโครงการ

• Eligibility Requirements: เป็นผู้มีอาชีพขายพัสดุที่ประกวดราคาซื้อด้วยวิธีดังกล่าว และไม่เป็นผู้ถูกแจ้งเวียนชื่อผู้ทิ้งงานของทางราชการ
• Standards Compliance: สินค้าต้องผลิตจากโรงงานที่ได้มาตรฐาน และอุปกรณ์ฉนวนต้องผ่านการทดสอบแรงดันไฟฟ้า (Withstand voltage) ตามข้อกำหนด เช่น ไม่น้อยกว่า 75 kV ต่อฟุต เป็นเวลา 5 นาที
• Experience: มีประสบการณ์ในการจำหน่ายอุปกรณ์ไฟฟ้าแรงสูงหรือเครื่องมือฮอตไลน์ให้แก่หน่วยงานราชการ รัฐวิสาหกิจ หรือเอกชนที่น่าเชื่อถือ
• Previous Project Cost: -
• Technical Capabilities: สามารถจัดหาเครื่องมือที่เป็นไปตามข้อกำหนดทางเทคนิค (Specification No. ที่กำหนด) และมีเอกสารแคตตาล็อก (Catalogue) ยืนยันคุณลักษณะ
• Personnel: -

• พิจารณาตัดสินด้วยเกณฑ์ราคาต่ำสุด (Lowest Price) หรือเกณฑ์ราคาประกอบคุณภาพ (ตามระเบียบการจัดซื้อจัดจ้างของการไฟฟ้าส่วนภูมิภาค)
• ตรวจสอบความถูกต้องครบถ้วนของรายการพัสดุ คุณลักษณะทางเทคนิค (Technical Specifications) และเอกสารแคตตาล็อกของผู้ผลิต

• Wire Tongs: ทำจากวัสดุ Epoxiglas หรือเทียบเท่า มีฉนวนทนแรงดันไฟฟ้าไม่น้อยกว่า 75 kV ต่อฟุต เป็นเวลา 5 นาที มีหัวเกี่ยว (Hook type tong head)
• Hotline Wire Grip: แบบร่องฟันกลม (Round inside jaw contour type) หรือแบบขนาน (Parallel jaw grip) พร้อมสลักล็อกอัตโนมัติป้องกันหลุด รองรับกระแสและขนาดสายหลากหลายตั้งแต่ 25 mm2 ถึง 400 mm2
• Hoist Ratchet Type: ด้ามจับไฟเบอร์กลาส สายรัดไนลอน (Nylon strap) มีตาขอฮอตไลน์ (Hotstick eyes) บนตะขอความปลอดภัยทั้งสองด้าน ความจุไม่น้อยกว่า 750 kg / 1,500 kg
• อุปกรณ์โลหะทั้งหมด: ทำจากอลูมิเนียมอัลลอยด์ชุบแข็ง (Heat-treated aluminum alloy) หรือเหล็กชุบสังกะสีที่มีความแข็งแรงทนทานต่อแรงดึงตามพิกัดที่กำหนด

• การจ่ายเงิน: เป็นไปตามเงื่อนไขมาตรฐานของการไฟฟ้าส่วนภูมิภาค (PEA) หลังการตรวจรับพัสดุกรรมสิทธิ์สมบูรณ์
• ค่าปรับ: กรณีส่งมอบเกินกำหนด จะต้องชำระค่าปรับตามอัตราที่ PEA กำหนดในสัญญา
• การรับประกัน: รับประกันความชำรุดบกพร่องจากการผลิตตามเงื่อนไขของการไฟฟ้าส่วนภูมิภาค

1. Q: อุปกรณ์ไม้ค้ำยันสายไฟฟ้า (Wire Tong) กำหนดให้ทำจากวัสดุอะไรและต้องทนแรงดันไฟฟ้าเท่าใด?
   A: ทำจากวัสดุ Epoxiglas หรือเทียบเท่า และต้องมีคุณสมบัติทนแรงดันไฟฟ้าไม่น้อยกว่า 75 kV ต่อฟุต เป็นเวลา 5 นาที
   2. Q: Hotline Wire Grip สำหรับสายเปลือยและสายหุ้มฉนวนรองรับขนาดสายตัวนำช่วงใดบ้าง?
   A: รองรับตั้งแต่ขนาด 25 mm2 ไปจนถึง 400 mm2 ขึ้นอยู่กับรุ่นและประเภทของแคลมป์ตามข้อกำหนดในรายการ
   3. Q: Hoist Ratchet Type ที่ใช้ในงานฮอตไลน์มีคุณลักษณะสำคัญอย่างไร?
   A: ด้ามจับทำจากไฟเบอร์กลาส สายรัดทำจากไนลอน (Nylon strap) มีตาขอฮอตไลน์บนตะขอความปลอดภัยทั้งสองด้าน พิกัดรับน้ำหนักเริ่มต้นที่ 750 กก. ขึ้นไป
   4. Q: อุปกรณ์โลหะประเภท Saddle และ Clamp ทำจากวัสดุอะไร?
   A: ทำจากอลูมิเนียมอัลลอยด์ชุบแข็ง (Heat-treated aluminum alloy) ที่มีน้ำหนักเบาและมีความแข็งแรงสูง
   5. Q: Wire Tong Saddle สามารถรองรับน้ำหนักทดสอบการทำงานขั้นต่ำเท่าใด?
   A: สามารถรองรับน้ำหนักได้ไม่น้อยกว่า 450 กก. (สำหรับรุ่นมาตรฐาน) และมีรุ่นเสริม (Extension) ที่รองรับน้ำหนักได้ไม่น้อยกว่า 360 กก.
   6. Q: ข้อกำหนดสเปก (Specification No.) หลักสำหรับ Hotline Wire Grip คืออะไร?
   A: ใช้ข้อกำหนดหมายเลข RHOT-082/2560
   7. Q: Rope Snubbing Bracket มีข้อกำหนดความสามารถในการรับน้ำหนักอย่างไร?
   A: ต้องมีวงแหวนอย่างน้อย 6 วง และมีพิกัดรับน้ำหนักรวมสูงสุดไม่น้อยกว่า 450 กก. (1,000 ปอนด์)
   8. Q: Extension Chain มีข้อกำหนดความยาวและแรงดึงอย่างไร?
   A: มีความยาวโดยรวมไม่น้อยกว่า 450 มม. (18 นิ้ว) และผ่านการทดสอบการใช้งานที่น้ำหนักไม่น้อยกว่า 1,100 กก.
   9. Q: ผู้เสนอราคาต้องระบุข้อมูลใดบ้างในตารางราคา (Price Schedule)?
   A: ต้องระบุชื่อผู้ผลิต (Manufacturer), เครื่องหมายการค้า (Trade-mark), และประเทศผู้ผลิต (Country of origin) ให้ชัดเจน
   10. Q: โครงการนี้เกี่ยวข้องกับการปฏิบัติงานในระบบไฟฟ้าแรงสูงระดับใด?
   A: เกี่ยวข้องกับระบบจำหน่ายไฟฟ้าแรงสูงขนาด 22 kV และ 33 kV ของการไฟฟ้าส่วนภูมิภาค

1 1090210120
2
1090210109
รายการชุดเครื่องมือสําหรับงานออกสติก 22.33 kV 16รายการ) ชุดอุปกรณ์โลหะสําหรับงานออทิสติก 22,33 kV (จํานวน 16 รายการ)
Extension chain
Pole clamp 2"
4
EA
6
EA
3❘ 1090210110
Pole clamp 21⁄2"
4
EA
4
1090210122 Saddle extension 4"
4
EA
5
1090210121
Wire tong band 2"
3 EA
6
1090210101
Wire tong band 2 1⁄2"
2
EA
7
1090210116
Wire tong pole clevis 2 1⁄2"
2
EA
8
1090210119
Wire tong saddle pole type
8
Set
9
1090210117
Wire tong saddle clevis
1
EA
10
1090200005
Tie stick head (Fixed prong)
6
EA
11
1090200007
Tie stick head (Rotary prong)
2
EA
12
1090210112
Rope snubbing bracket
2
EA
13
1090260004
Hotline wire grip for hare conductor 25 - 50 mm2
2
EA
14
15
16
1000230032
Hotline wire grip for SAC 50 - 95 mm2
Hotline wire grip for SAC 95 - 185 min
Iloist ratchet type (Nylon strap)
الحه
3
EA
2
الله
EA
2
Set
Invitation to Bid No.:
Specification No.: R- 410/2540
C3 Schedule of detailed requirement
PEA
Itern
Material
Quantity
No.
1
09210120
II

• 4 -
  Description
  !
  RHOT-061 25460
  pc(s)| Extension Chain, not less than 450 mm (18") in overall length, tested
  working load not less then 1,100 kg.
  Invitation to Bid No.:
  Specification No.: R-410/2540
  C4 Price schedule
  Item
  PEA
  Material
  Catalogue
  No.
  No.
  1
  09210120
  Π
  Extension Chain, overall length
  tested working load
  Description
  .mm,
  …………kg.
• 5-
  Manufacturer :
  Trade-mark:
  Country of origin:
  Bidder:
  Bid No.:
  Date:
  Quantity
  Unit Cost
  (See details
  & conditions
  attached)
  Total Cost
  (See details
  & conditions
  attached)
  pcs
  Invitation to Bid No. :
  Specification No.: R-132/2536
  C3 Schedule of detailed requirement
  COPY
  RHOT-008
  Material | Quantity
  PEA
  Item
  No.
  1
• 9526
  09210109:
  Description
  pc(s); POLE CLAMP, size 50 mm (2"), for attaching the wire tong
  }
  pole to the wire tong saddle.
  }
  !
  2 ¦
  9527 1
  pc(s); Ditto as Item 1, but size 63.5 mm (2 1/2")
  1
  1
  09210110
  II
  t
  :
  In cation to Bid No. :
  Spfication No.: R-132/2536
  C4 -ice schedule
  [
  SA
  Item erial¦ Catalogue;
• 5-
  f
  No.
  1
  No.
  [

1
C
1}
11
;
I
I
F
1
11
F
Manufacturer:
Trade-mark:
Country of Origin: Bidder:
Bid No.: Date:
Description
1
1
t
1
1
t
Unit Cost
(See details
Total Cost (See details
Quantity & conditions
I
:
attached)
T
& conditions
attached)
Invitation to Bid No.:
Specification No.: R- 133/2540
C3 Schedule of detailed requirement
PEA
Item Material Quantity
No.
pc(s)
1
09210000

• 4-
  COPY
  !.
  Description
  Wire Tong, hook type tong head. Pole shall be made of Epoxiglas or equivalent insulation material, having withstand voltage not less than 75 kV per foot for 5 minutes. The tong has a butt swivel for attaching to slide or lever supports, with :
  Pole dimensions;
• Diameter
• Overall length
  For conductor diameter
  range of
  : 50 mm (2)
  : 2.40 - 2.70 m (8’ - 9’)
  : 4.1 mm to 57.0 mm
  2
  09210001
  Ditto as Item 1, but
  Pole dimensions;
• Diameter
• Overall length
  : 50 mm (2)
  : 3.00 - 3.30 m (10’ - 11’)
  الما
  3
  09210002
  Ditto as Item 1, but
  4
  09210004
  5
  09210008
  Pole dimensions;
• Diameter
• Overall length
  Ditto as Item 1, but spliced pole
  Pole dimensions ;
• Diameter
• Overall length
  Ditto as Item 1, but
  Pole dimensions;

Diameter

• Overall length
  : 50 mm (2)
  : 3.60 -4.00 m (12’ - 13)
  : 63.5 mm (2.5")
  : 4.80 - 5.20 m (16-17)
  : 63.5 mm (2.5")
  : 3.00 - 3.30 m (10’ - 11’)
  Invitation to Bid No.:
  Specification No.: R- 133/2540
  C3 Schedule of detailed requirement
  PEA
• 5 -
  Item
  Material Quantity
  No.
  pc(s)
  6
  09210009
  Ditto as Item 1, but
  7
  09210010
  8
  09210119
  Description
  Pole dimensions ;
• Diameter
• Overall length
  Ditto as Item 1, but
  Pole dimensions;
• Diameter
  : 63.5 mm (2.5) : 3.60 -4.00 m (12’ 13')

Overall length
: 63.5 mm (2.5")
: 4.20 - 4.50 m (14’ -15′)
Wire Tong Saddle, pole type, with wheel tightener, less clamp. The saddle shall be able to support load not less than 450 kg.
9
09210108
Wire Tong Saddle, cross-arm type, adjustable for cross-arm section range of 100 mm x 100 mm (4 x 4) to 120 mm x 120 mm (5" x 5"), tested working load not less than 220 kg.
—
10
09210117
11 09210122
12
09210121
13 09210101
Wire Tong Saddle Clevis, for attaching the butt ring of the wire tong to the wire tong saddle.
Wire Tong Saddle Extension, size 100 mm (4), tested working load not less than 360 kg.
Wire Tong Band, for 50 mm (2) pole diameter. The band can be separated into two(2) halves and shall be provided with hinges and rope rings.
Ditto as Item 12, but for 63.5 mm (2.5") pole diameter.
II
Invitation to Bid No.:
Specification No.: R- 133/2540
C3 Schedule of detailed requirement
PEA
Item Material Quantity
No.
pc(s)
14
09210115

• 8 -
  Description
  Wire Tong Pole Clevis, size 50 mm (2), for engaging the butt rings of two(3) wire tongs used as side braces.
  15
  09210116
  Ditto as Item 14, but size 63.5 mm (2.5°).
  16
  09210123
  II
  Ditto as Item 14, but size 76 mm (3”).
  Invitation to Bid No.:
  Specification No. R-133/2540
• 7 -
  C4 Price schedule
  Item
  PEA
  Material
  Catalogue
  No.
  No.
  1 09210000
  2
  09210001
  II
  Description
  Mfacturer:
  Trade-mark:
  Country of origin:
  Bidder;
  Bid No.:
  Date:
  Wire Tong, book type tong head. Pole shall be made of Epoxiglas or equivalent insulation material, having withstand voltage kV per foot for …….. minutes. The tong has a butt swivel for attaching to slide or lever supports, with:
  Pole dimensions;
• Diameter
• Overall length
  For conductor diameter
  range of
  :
  min
  mm
  mm to …….
  mm
  Wire Tong, hook type tong head. Pole shall be made of Epoxiglas or equivalent insulation material, having withstand voltage. kV per foot for ……… minutes. The tong has a butt swivel for attaching to slide or lever supports, with :
  Pole dimensions;
  Diameter
  Overall length
  For conductor diameter
  תנח
  mm
  range of
  mm to ………. mm
  Quantity pc(s)
  Unit Cost
  (See details
  & conditions
  attached)
  Total Cost
  (See details
  & conditions
  attached)
  fir
  Invitation to Bid No..
  Specification No.. R-133/2540
  C4 Price schedule
  PEA
  Itern Material
  Catalogue
  No.
  No.
  3
  09210002
  Description
  Mfacturer:
  Trade-mark: Country of origin:
  Bidder:
  Bid No.:
  Date:
  Wire Tong, hook type tong head. Pole shall be made of Epoxiglas
  or equivalent insulation material, having withstand voltage
  kV per foot for …….. minutes. The tong has a butt swivel
  for attaching to slide or lever supports, with:
  Pole dimensions ;

Diameter

• Overall length
  For conductor diameter
  am
  range of
  mm to ………. mm
  09210004
  Wire Tong, hook type tong head, spliced pole. Pole shall be made
  of Epoxiglas or equivalent insulation material, having with stand
  voltage……….. kV per foot for …….. minutes. The tong has a
  butt swivel for attaching to slide or lever supports, with:
  Pole dimensions;
  II

Diameter

• Overall length
  For conductor diameter
  range of
  min
  min
  mm to ………. mni
  Quantity
  pc(s)
  Unit Cost
  (See details
  & conditions
  Total Cost
  (See details
  & conditions
  attached)
  attached)
  Invitation to Bid No.:
  Specification No.: R-133/2540
  C4 Price schedule
  PEA
  Item Material
  Catalogue
  No.
  No.
  5
  09210008
  ’
  6
  09210009
  11
  Description

Ma Facturer:
Trade-mark:
Country of origin:
Bidder:
Bid No.:
Date:
Wire Tong, hook type tong head. Pole shall be made of Epoxiglas
or equivalent insulation material, having withstand voltage
kV per foot for…….. minutes. The tong has a butt swivel
for attaching to slide or lever supports, with
Pole dimensions:

• Diameter
  · Overall length
  For conductor diameter
  range of
  mm
  mm
  mm to ……
  mm
  Wire Tong, hook type tong head. Pole shall be made of Epoxiglas
  or equivalent insulation material, having withstand voltage
  kV per foot for…….. minutes. The tong has a butt swivel
  for attaching to slide or lever supports, with:
  Pole dimensions ;

Diameter
Overall length
For conductor diameter
range of
;
חות
mm
mm to …………………. mm
Quantity pe(s)
Unit Cost
(See details
& conditions
Total Cost
(See details
& conditions
attached)
attached)
Invitation to Bid No.:
Specification No.: R-138/2540
C4 Price schedule
Item
PEA
Material
Catalogue
No.
No.
7
09210010
8 09210119
9
09210108
10 09210117
II
1
Description
MCfacturer:
Trade-mark :
Country of origin:
Bidder:
Bid No.:
Date:
Wire Tong, hook type tong head. Pole shall be made of Epoxiglas
or equivalent insulation material, having withstand voltage
kV per foot for …….. minutes. The tong has a butt swivel
for attaching to slide or lever supports, with:
Pole dimensions;
• Diameter

• Overall length
  For conductor diameter
  range of
  mm
  mm
  ….. mm to ………. min
  Wire Tong Saddle, pole type, with wheel tightener, less clamp. The
  saddle shall be able to support load…………… kg.
  Wire Tong Saddle, cross-arm type, adjustable for cross-arm section
  range of …… mm x
  tested working load ………. …. kg.
  mm to ……
  mm x
  mm,
  Wire Tong Saddle Clevis, for attaching the butt ring of the wire tong
  to the wire tong saddle.
  Quantity
  pc(s)
  Unit Cost
  (See details
  & conditions
  Total Cost
  (See details
  & conditions
  attached)
  attached)
  Invitation to Bid No.:
  Specification No.. R-133/2540
• 11 -
  Má acturer:
  Trade-mark:
  Country of origin:
  Bidder:
  Bid No.:
  C4 Price schedule
  Item
  PEA
  Material
  Catalogue
  No.
  No.
  11
  09210122
  12
  09210121
  13
  .09210101
  14
  09210115
  Date:
  Quantity
  Description
  pc(s)
  Unit Cost
  (See details
  & conditions
  Total Cost
  (See details
  & conditions
  attached)
  attached)
  .kg.
  Wire Tong Saddle Extension, size
  load ……
  mm, tested working
  Wire Tong Band, for 50 mm (2) pole diameter. The band can be
  separated into two(2) halves and shall be provided with hinges and
  rope rings.
  Ditto as Item 12, but for 63.5 mm (2.5 ) pole diameter.
  Wire Tong Pole Clevis, size 50 mm (2"), for engaging the butt rings
  of two(2) wire tongs used as side braces.
  15
  09210116
  Ditto as Item 14, but size 63.5 mm (2.5").
  16
  09210123
  Ditto as Item 14, but size 76 mm (3 ).
  (37)
  II
  CHANCE 7B-3
  WIRE TONG APPLICATIONS
  The following information is intended to aid in selecting the proper Wire Tongs for a particular application and greatest
  load. Four popular methods of application are shown on these pages.
  요
  B
  WEIGHT
  **
  BLOCKS
  30%
  WEIGHT
  Figure 1 Wire Tongs with saddles and wire tong blocks clamp on holding stick.

Figure 2 Wire Tong with saddles and swivel wire tong band on lift stick.
WORKING LOADS FOR CHANCE WIRE TONGS*
Maximum Wire Size and Span
Figure
No.
Pole Dia. (Inches) Epoxiglas
Type
A
B
Support
Maximum Working Load (lb. per Conductor)
(In Feet)
(Level Ground)
ACSR
Copper
Size Span
Size Span
1
2 x 12
11⁄2 x 10
Saddles
275
4/0
700
4/0
300
21⁄2 x 12
1 x 10
Lever Lift
475
4/0
1200
4/0
500
2
2
x 12
11⁄2 x 10
Saddles
275
4/0
700
4/0
300
21⁄2 x 12
12 x 10
Lever Lift
476
4/0
1200
4/0
500
*Based on Tong “B” substantially horizontal. The lower the top saddle is placed below the conductor level, the greater the strain on Tong
“A” and therefore the less load it can support.
NOTE:
For suggested minimum clearances for hot line tools on various system voltages see page 78-2
(1) SUPPORTS-Maximum recommended load for Saddles is 800 pounds. The Lever Lift will exceed the strength of Wire Tongs when load is properly applied in line with the pole.
(2) WORKING LOADS — Any elevated structure requires an analysis in determining the load. When calculations are impractical or unnecessary and a pole is slightly higher than neighboring poles, it may be sufficient to use the total weight of the span on each side as the maximum working load. This does not apply to hilltop structures where special analysis must be made to determine the load.
A. B. CHANCE COMPANY — CENTRALIA, MISSOURI
When the working load is greater than that given in the table for a particular Wire Tong, it will be necessary to use double Wire Tongs with double-type lever lift, or use a larger Wire Tong.
—
(3) EPOXIGLAS WORKING LOADS The maximum working loads given for Epoxiglas Wire Tongs are based on a pole deflection of approximately one inch when used in the manner shown. The cantilever values, with a safety factor of more than two, are: 1/2" 375 ft.-lb. 2" — 900 ft.- lb.21⁄2" — 1500 ft.-lb. 3"-2500 ft.-lb. The tensile strength values with a safety factor of more than two are: 1/2" 1500 lb. 2" — 2000 lb. 21⁄2′′ — 2500 lb. and 3" — 3000 lb.

SEPTEMBER 1990
7B-4
CHANCE
WIRE TONG APPLICATIONS
5’
6’
WEIGHT
2*
B
A
:
Figure 3-Wire Tongs, lever lift, link stick, and rope blocks used on heavy conductors.
Figure 4- Three Phase Lift Set where all three wires are lifted at once.
WORKING LOADS FOR CHANCE WIRE TONGS
Maximum Wire Size and Span
(In Feet) ACSR
(Level Ground)
Figure No.
Pole Dia. (Inches)
A
Epoxiglas B
C
Type Support
Maximum Working Load (lb. per Conductor)
Copper
Size Span
Size Span
3
2 x 12
11/2
350
21⁄2 x 12
1/2
4
2 x 12
2 x 8
2 x 8
Lever Lift Saddles
1000
4/0
397.5 1150
850
4/0
375
250
850
225+
4/0
550
4/0
230
With max. lift of 5’ above saddle, max. unbalance of 225 lb. on one side.
For suggested minimum clearances for hot line tools on various system voltages see page 78-2
NOTE:
(1) SUPPORTS-Maximum recommended load for Saddles with extensions, is 800 pounds. The Lever Lift will exceed the strength of Wire Tongs when load is properly applied in line with the pole.
(2) WORKING LOADS-Any elevated structure requires an analysis in determining the load. When calculations are impractical or unnecessary and a pole is slightly higher than neighboring poles, it may be sufficient to use the total weight of the span on each side as the maximum working load. This does not apply to hilltop structures where special analysis must be made to determine the load.
When the working load is greater than that given in the table for a particular Wire Tong, it will be necessary to use double Wire Tongs with double-type lever lift, or use a larger Wire Tong.
(3) EPOXIGLAS® WORKING LOADS The maximum working loads given for Epoxiglas Wire Tongs are based on a pole deflection of approximately one inch when used in the manner shown. The cantilever values, with a safety factor of more than two, are: 1/2" - 375 ft-lb. 2" — 900 ft.-lb. 21/2" 1500 ft.-lb. 3′′ — 2500 ft.-lb. The tensile strength values with a safety factor of more than two are: 11⁄2" 1500 lb. 2" — 2000 lb. 21⁄2" 2500 lb. and 3" . 3000 lb.
—
—
SEPTEMBER 1990
A. B. CHANCE COMPANY — CENTRALIA, MISSOURI
WIRE TONGS
Chance Wire Tongs have many applications for moving and holding live conductors clear of the working area, for flat crossarm and/or ridge pin-construction, on horizontal post insulator struc- tures, all types of suspension insulator lines, as auxiliary arm braces, and in EHV construction for brace pole or ladder positioning guides.
A whole family of clamps, attachments, saddles and lever lifts allow the wire tongs to be adapted specifically to the mechanical requirements f various maintenance jobs.
Chance Wire Tongs are made with Epoxiglas poles. The castings are made of heat treated aluminum alloy, separated by bronze wear rings.
The wide range jaws on the head can be clamped tightly on the conductor by turning the stick from a position beyond the minimum working clearances (see page 7B-2). A large head is available on two sizes of tongs where extremely large conductors are encountered.
For working loads of Chance Wire Tongs as an aid to selecting the proper size for a particular application, see pages 7B-3 and 7B-4 (Note 3).
Catalog
Pole Dia.
No.
& Length
Overall Length
Wire Size
Min.
Max.
Approx. Weight
H4645-8
11⁄2 x 8’
8’ 7"
0.16"
2.25
7
fb. 3.2 kg.
H4645-10
1% x 10’
10’ 7"
0.16
2.25"
8 lb/ 3,6 kg.
H4645-8
H4646-8
2" x 8’
8'8"
0.16" 2.25"
11
lb/ 5,0 kg.
H4646-10
2" x 10’
10’ 8"
0.16*
2.25*
12
lb/ 6.4 kg.
H4646-12
2" x 12’
12’ 8"
0.16"
2.25"
14 lb
6.3 kg.
H4647-10
21⁄2" x 10’
10’ 8"
0.16
2.25"
161⁄2 lb
7.4 kg.
H4647-12
21⁄2" x 12’
12’ 8"
0.16"
2.25"
181⁄2 lb
8.3 kg.
H4647-14
21/2" x 14’
14’ 8"
0.16"
2.25"
201⁄2 lb 9.2 kg.
H4647-16
Spliced 21⁄2" x 16’
17’ 2"
0.16"
2.25"
28
lb/12.6 kg.
C400-0171
3" x 12’
12’ 10"
0.16"
2.25" 30
lb/13.5 kg.
C400-1072
3" x 14’
14’ 10"
0.16"
2.25" 35
lb/15.9 kg.
H4677-12
21⁄2" x 12’
12′ 10′′
1.50"
2.88" 23
lb/10.4 kg.
H4677-14
21⁄2" x 14’
14’ 10"
1.50"
2.88"
25
lb/11.3 kg.
A. B. CHANCE COMPANY — CENTRALIA, MISSOURI
SEPTEMBER 1990
t
CHANCE
7B-5
8-6 CHANCE
WIRE TONG SADDLE CLEVIS
WIRE TONG POLE CLEVIS
This clevis is used to attach the butt ring of a wire tong, used as a brace for an auxiliary crossarm, to a wire tong saddle … so the wire tong can be pivoted to engage the wire tong arm stirrup. Thus the wire tong can be attached after the
has been secured to the pole.
The Wire Tong Pole Clevis clamps around the vertical wire tong supporting an auxiliary crossarm, and engages the butt rings of the two wire tongs used as side braces.
Cat. No. M1728-4
Cat. No. M4740-14
Description
Wire Tong Saddle Clevis
Weight 14 oz. 3 kg.
M1728-5 C400-0345
Weight 24 lb/1.0 kg. 21⁄2 lb/1.1 kg.
Size
2"
21"
3"
3 lb/1.7 kg.
L
D
"
WIRE
TONG
BAND
WIRE TONG BAND
Two screws clamp the band to the wire tong. Each screw is threaded into a half of the band and engages a slot in the opposite half, permitting the halves of the band to be separated by a sliding action without removing the screws. The hinge ring slides on the band, permitting rotation of the wire tong when the tong is supported by rope blocks. For positive insulation between rope blocks and live conductors, install the band the minimum distance or more for voltage class (see table on page 7B-2).
Cat. No.
For Pole Dia. 11/2"
Weight 11⁄2 lb/0.7 kg. 1% lb./0.7 kg.
M1729-3
M1729
2"
M1729-1
21/2"
1 lb/0.8 kg.
M1729-2
3"
11⁄2 lb./0.8 kg.
WIRE TONG
BLOCKS CLAMP
WIRE TONG BLOCKS CLAMP The Chance Wire Tong Blocks Clamp where pull is in line with pole. The Wire Tong Blocks Clamp is secured to the wire tong under tension. Rope blocks are connected to the ring of the clamp. This method of application places the force of the pull in line with the top wire tong… assisting in pulling heavy conductors back in position.
Cat. No. M4743
For Pole Dia. 11⁄2"
Weight
2 lb/1.2 kg.
WIRE TONG SWIVEL
When two wire tongs are hooked side-by-side on a conduc- tor, that portion of the conductor between the tong heads may kink, because the weight of the conductor pushes down on the lift tong and pulls outward on the holding tong. By attaching the swivel to the lift tong and the holding tong hooked into the clevis attachment, there is only one tong hooked on the conductor, and since the clevis pivots to permit the tongs to assume correct positions, there is no kinking of the conductor.
Cat. No.
SEPTEMBER 1990
M4745
M4745-1
For Pole Dia.
2"
22"
Weight 11⁄2 lb./.07 kg. 1 lb/.08 kg.
A. B. CHANCE COMPANY - CENTRALIA, MISSOURI
يلة
WIRE TONG SADDLES
CHANCE
N4746-10W
M4740-16W
M4740-3W
M4740-20W
Strong Aluminum Alloys
Chance Pole Type Wire Tong Saddles are made of lightweight alumi num for handling ease. These rugged heat-treated saddles will support a maximum of 1000 pounds (450kg) without the extension.
The clamp is set far enough away from the base to give ample clearance for most jobs. Where additional clearance is required, the Chance Wire Tong Saddle Extension can be easily bolted to the saddle. This heat. treated aluminum-alloy extension is 4 inches (100mm) long and has a tested working load rating of 800 pounds (360kg).
Easily Applied
The Wheel Type fasteners are easy to apply, hold the saddle firmly in place, and prevent riding down and excessive play.
The Wheel Tightener has the advantage of being able to fit into close places such as between crossarm braces, under guy wires, etc.
Catalog No. M4740- 3W
M4740. 4W M4740- 5W
Description
Shown above are M4741-1 Pole Clamp, and C400-0073 Extension.
Saddle and Tightener and 1/2" (37.5mm) clamp Saddle and Tightener and 2" (50mm) clamp Saddle and Tightener and 22" (62.5mm) clamp Saddle and Tightener and 3" (75mm) clamp Saddle and Tightener less clamp Saddle Wheel Tightener and Clevis
Saddle, Tightener, 11⁄2” (37.5mm) clamp & extension Saddle, Tightener, 2′′ (50mm) clamp & extension Saddle, Tightener, 22" (62.5mm) clamp & extension Saddle, Tightener, 3” (75mm) clamp & extension Saddle, Tightener, extension less clamp Wire Tong Saddle Extension
M4740-9W
M4740-10W
M4740-15W
M4740-16W
M4740-17W
M4740-18W M4740-19W
M4740-20W
C400-0073
M4741-1
M4741-2
2" (50mm) pole clamp only
M4741-3
M4741-5
1/2" (37.5mm) pole clamp only
21⁄2" (62.5mm) pole clamp only
3" (75min) pole clamp only
A. B. CHANCE COMPANY — CENTRALIA, MISSOURI
Approx. Weight
10 lb. 1 oz/4.56 kg. 10 lb. 5 oz/4.68 kg.
10 lb. 9 oz./4.80 kg. 10 lb. 12 oz/4.90 kg. 8 lb. 13.60 kg-
6 lb. 11 oz/3.03 kg. 11 lb. 1 oz/5.01 kg. 11lb. 5 oz/5.13 kg. 11 lb. 9 oz./5.24 kg. 11 lb. 12 oz/5.33 kg.
9 lb. 1 lb.
/4.08 kg.
70.45 kg.
2 lb. 1 oz/0.93 kg.
2 lb. 5 oz/1.04 kg.
2 lb. 9 oz/1.20 kg. 2 lb. 12 oz/1.25 kg.
SEPTEMBER 1990
3-8
CHANCE
M1848W
CHAIN TIGHTENERS & EXTENSIONS
For building wire tong holding assemblies, or for replacement. Wheel tightening action makes a tool easy to apply… holds it firmly in place prevents riding down and excess play. Wheel tightener has spring take-up.
Maximum workload is 2,500 pounds for both tools. Extension Chain increases length of the Chain Tightener so it can be used on large diameter poles.
Catalog No. M1848W
Description
Wheel Tightener Assembly (36" Chain)
5
Weight
lb/2.6 kg.
M1847
18" Extension Chain
1
lb .7 kg.
M1847-3
36" Extension Chain
3
lb/1.4 kg.
M1847-4
48" Extension Chain
4
lb/1.9 kg.
M1847-6
70358
72" Extension Chain
6
lb/2.8 kg.
Wheel Tightener Only
31⁄2 lb/1.8 kg.
٢
M4744
CROSSARM TYPE SADDLE
The Chance Crossarm Wire Tong Saddle is used on underbuilt arms when working space is limited or crowded with pole saddle(s). The pivoting action of the saddle swivel and pole clamp attachment provides a universal-joint action which allows complete freedom of movement of the wire tong…in any direction… and without binding. Saddle shown does not include pole clamps, shown on page 7B-7. Maximum work load is 500 pounds.
Weight
Catalog No. M44744
Fits Crossarms 3′′ x 44" to 4" x 8"
6 lb/2.7 kg.
M4742
TOWER TYPE SADDLE
The Chance Tower Type Wire Tong Saddle is used to support wire tongs or boom poles on towers. The saddle is securely fastened to the angle- iron tower leg by four hooks tightened by wing nuts. A clevis which bolts through the pivot lug permits rope blocks to be fastened so that they will pivot with the wire tong or boom pole. Saddle shown does not include pole clamps, shown on page 7B-7.
Catalog No. M4742 T400-1413
Description
Tower Saddle Less Clamp w/small hooks Tower Saddle w/small and large hooks
Weight 11.25 lb/5.1 kg.
13.25 lb/6 kg.
2
ROPE SNUBBING BRACKET
An easy way to prevent line snarls by snubbing all hand or light block lines to this bracket, mounted at the base of the pole to the six different rings. Bracket has a maximum total working load of 1,000 pounds.
Catalog No. M1846W
M1846W
Description
Bracket with wheel tightener and 36" Chain
Weight 71⁄2 lb/3.4 kg.
A. B. CHANCE COMPANY — CENTRALIA, MISSOURI

SEPTEMBER 1990
LEVER LIFT
WIRE TONG SUPPORT
Aluminum Base
Lever Lift Wire Tong Supports are employed where working space on the pole is limited, or on H-frame or heavy suspension insulator construction for raising or lowering conductors with wire tongs. As a general practice, the Lever Lift should be used in place of Wire Tong Saddles where loads exceed 500 pounds.
A wire tong is attached to the Single Type by simply removing the cotter key, sliding the shaft to the side, placing the butt ring of the tong into the fork, shooting the shaft through, and replacing the cotter key. For the Double Type, remove the wing nuts, slip butt rings of the two wire tongs on the shaft extensions and replace wing nuts.
Made of a high strength aluminum alloy, these lever Lifts are light in weight… and easy to handle. They provide a total conductor lift of 203⁄41⁄41⁄4 inches, and will support any size of wire tong. When two Lever Lifts are required, one at each side of the pole, they can be attached at virtually the same height. An arbor adapter is available to convert the Single Type Lever Lift to a Double Type when desired. Each Lever Lift is equipped with a clevis for attaching rope blocks. The clevis, used at the end of the Lever Lift for attaching the lower rope blocks, will rotate on the same pin that holds the wire tong(s), permitting freedom of movement.
Double Type
Catalog No.
Working Load
Description
Per Tong
Weight
M4760W
Single Type
1000 lb.
141⁄2 lb
M4760-2
Lever Lift
M4760-1W
Double Type
750 lb.
6.5 kg. 151⁄2 lb/
M4760-2
Lever Lift Arbor Adapter
7.0 kg.
1 lb/
.8 kg.
Epoxiglas Base
Epoxiglas Lever Lift Wire Tong Supports have the same application as the aluminum base units, but are normally used on higher transmission voltages where more lifting space is required. The Epoxiglas units have a total conductor lift of 36 inches. Both single and double type units are available, and the arbor adapter (M4760-2) shown above can be used to convert a single lever lift into a double lift for tow wire tongs.
The Epoxiglas member is 36" long and provides the same working load per tong as in the aluminum units.
Catalog
M4760W
CHANCE 7B-9
C400-1016
No.
Description
C400-1016 Epoxiglas Single
C400-1017| Epoxiglas Double
Lever Lift
Working Load Per Tong 1000 lbs.
Weight 18 lb./
Lever Lift
8.1 kg.
750 lbs.
19 lb 8.6 kg.
A. B. CHANCE COMPANY

CENTRALIA, MISSOURI
SEPTEMBER 1990
:
Invitation to Bid No.:
Specification No.: R-180/2589
C8 Schedule of detailed requirement
PEA

4
COPY
RHOT-006
Item Material | Quantity
No.
1
09200001
Description
set(s) TIE STICK, with rotary prong head and universal end. Pole shall be
made of Epoxiglas or equivalent material, having withstand voltage
not less than 75 kV per foot for 5 minutes, dimensions of 2.4 m

• 2.7 m (8’-9’) in overall length and 31 mm ( 1 1/4”) in diameter.
  A tie wire assistant shall be provided on the side of the pole.
  2
  09200003
  3
  09200005
  4
  09200006
  5
  09200007
  IL
  set(s) Ditto as Item 1, but rotary blade head and universal end.
  pc(s)| Tie stick head, fixed prong type. To be used with the universal pole
  for manipulating tie wires with looped ends.
  pc(s) Tie stick head, fixed blade type. To be used with the universal pole
  for manipulating tie wires with or without looped ends.
  pc(s) Tie stick head, rotary prong type. To be used with the universal
  pole for placing insulator tie with looped ends.
  Invitation to Bid No.:
  Specification No. R-130/2539
• 5 -
  Man, acturer :
  Trade-mark:
  Country of origin:
  Bidder:
  Bid No.:
  C4 Price schedule
  Item
  PEA
  Material
  Catalogue No.
  Description
  No.
  1
  09200001
  2
  09200003
  3
  09200005
  Tie stick, with rotary prong head and universal end.
  Tie stick, with rotary blade head and universal end.
  Tie stick head, fixed prong type.
  4
  09200006
  Tie stick head, fixed blade type.
  5
  09200007
  Tie stick head, rotary prong type.
  .
  Date:
  Unit Cost
  (See details
  Total Cost
  (See details
  & conditions.
  Quantity
  & conditions
  attached)
  set(s).
  set(s)
  pc(s)
  pc(s)
  pc(s)
  attached)
  :
  Invitation to Bid No.:
  Specification No.: R-123/2536
  C3 Schedule of detailed requirement
  Iten
  PEA Material
  No.
  1

  Quantity
  1
  II

RHST-DE
COPY
Description
set(s) ¦ ROPE SNUBBING BRACKET, with wheel tightener and chain.
The bracket shall have at least 6 rings and have a
| maximum total working load of not less than 450 kgs
¦ (1,000 lbs)
r
:
:
Invitation to Bid No.
Specification No.: R-123/2536
C4 Price schedule
Item
}
$
PEA
Material Catalogue
No.
No.
1
1
1

• 5-
  Description
  Manufacturer:
  Trade-mark:
  Country of Origin: Bidder: "
  Bid No.:
  Date:
  I
  ¦.
  }
  J
  Unit Cost (See details
  Quantity & conditions
  1
  attached)
  1
  t
  1
  Total Cost (See details
  & conditions attached)
  PROVINCIAL ELECTRICITY AUTHORITY
  TECHNICAL SPECIFICATION DIVISION
  Specification No. : RIIOT-082/2560 HOTLINE WIRE GRIP
  C3 Schedule of detailed requirement
  Invitation to Bid No. :
  PEA
  Item
  Quantity
  Material No.
  I
  1090260004
  pc(s)
  2
  1090260005
  Lad
  3
  1090260006
  4
  1090260007
  COPY
  Page 1 of 1
  Description
  HOTLINE WIRE GRIP, round inside jaw contour type, with automatically close
  wire guard latch, for bare aluminium conductor diameter range of 6.42 mm to 9.06 mm (sizes 25 mm2 to 50 mm2), with safe load not less than 2,000 kg .
  pc(s)
  HOTLINE WIRE GRIP, round inside jaw contour type, with automatically close
  wire guard latch. for bare aluminium conductor diameter range of 10.75 mm to
  12.60 mm (sizes 70 mm2 to 95 mm2), with safe load not less than 2,000 kg -
  pe(s)
  pc(s)
  HOTLINE WIRE GRIP, round inside jaw contour type, with automatically close
  wire guard latch, for bare aluminium conductor diameter range of 14.25 mm to
  17.64 mm (sizes 120 mm to 185 mm), with safe load not less than 3,500 kg .
  HOTLINE WIRE GRIP, round inside jaw contour type, with automatically close
  wire guard latch, for bare aluminium conductor diameter range of 20.00 mm to 22.00
  mm (sizes 240 mm3), with safe load not less than 3,500 kg .
  5
  1090260008
  pc(s)
  TSP
  THE A
  II
  HOTLINE WIRE GRIP, parallel jaw grip, wire grip has latch closes automatically
  to guard against grip accidently disengaging from wire. Grips designed for use on
  bare aluminium and ACSR conductor,
  Jaw opening
  Maximum safe load
  Total weight
  2
  : for grip conductor size 185 mm2 (diameter 17.8 mun) -
  2
  400 mm2 (diameter 27.0 mm), or better
  : not less than 3,000 kg
  : not more than 4 kg
  PKOVINCIAL ELECTRICITY AUTHOR, LY
  Specification No. : RHOT-082/2560 HOTLINE WIRE GRIP
  C4 Price schedule
  Invitation to Bid No.:
  TECHNICAL SPECIFICATION DIVISION
  COPY
  Page 1 of 1
  Manufacturer:
  Trade-mark:
  Country of origin :
  Unit Cost
  Total Cost
  PEA
  Catalogue
  Item
  Material
  No.
  No.
  1
  1090260004
  (See details &
  (See details &
  Description
  Quantity
  Condition
  Condition
  attached)
  attached)
  to
  HOTLINE WIRE GRIP, for bare aluminium conductor diameter range of ………………………… mm
  mm, with safe load …..
  pc(s)
  kg.
  2
  1090260005
  HOTLINE WIRE GRIP, for bare aluminium conductor diameter range of
  בחרתו
  pc(s)
  to
  mm, with safe load ……
  kg.
  3
  1090260006
  HOTLINE WIRE GRIP, for bare aluminium conductor diameter range of …….
  mm
  pc(s)
  to
  mm, with safe load ……
  kg.
  4
  1090260007
  HOTLINE WIRE GRIP, for bare aluminium conductor diameter range of
  mm
  pc(s)
  to
  mm, with safe load ……..
  kg.
  5
  1090260008
  TSP
  II
  PEA
  HOTLINE WIRE GRIP, parallel jaw grip, wire grip has latch closes automatically to
  guard against grip accidently disengaging from wire. Grips designed for use on bare
  aluminium and ACSR conductor.
  Jaw opening
  ; for grip conductor size
  mm2 to
  Maximum safe load
  kg
  Total weight
  kg
  pc(s)
  Invitation to Bid No.:
  Specification No.: R-124/2542
  C3 Schedule of detailed requirement
  Item
  PEA
  Material
  No.
  Quantity
  1
  09040300
  2
  09040301
  3
  09040302
  4
  09040303
  II
• 4-
  Description
  pc(s) Wire grip, round inside jaw contour type, serpentine jaws, with:
  Grip diameter range
  Safe load, maximum
  Applications

: 8.0 12.5 mm, or better
: not less than 2,000 kg
: for PVC-insulated cable
pc(s) Ditto as Item 1, but :
Grip diameter range
Safe load, maximum
: 12.6 - 20.0 min, or better
: not less than 3,500 kg
pc(s) Ditto as Item 1, but :
Grip diameter range
Safe load, maximum
: 20.1 - 25.5 mm, or better
: not less than 3,500 kg
pc(s) Ditto as Item 1, but:
Grip diameter range
Safe load, maximum
: 25.6-33.0 mm, or better
: not less than 3,500 kg
Note:
Enclosed “Table Applications of Wire Grip”, one (1) page.
Table
Applications of Wire Grip
Size of cables (mm3)/Overall outside diameter (mm)
PEA
Type
System
Item
Material
Grip range
of
voltage
No.
cable
25 mm2 35 mm2 | 50 mm2 | 70
2
70 mm2
2951
95 mm2
120 mm2
150 mm2
185 mm2
1
09040300 8.0 - 12.5 mm
PVC
750 V
8.6 mm
9.7 mm
12.0 mm

PIC
22 kV
12.5 mm

PIC
33 kV

2
09040301 12.6 - 20.0 mm
PVC
750 V
1
PIC
22 kV
PIC
33 kV
3
09040302 20.125.5 mm
PVC
750 V
I
I
14.5 mm
I
19.5 mm
13.0 mm
15.0 mm
17.0 mm
18.5 mm
14.5 mm
18.0 mm
20.0 mm

16.5 mm
1
I
I
I
PIC
22 kV
PIC
33 kV

21.5 mm

21.0 mm
23.0 mm
25.5 mm
SAC
22 kV
·
SAC
33 kV
4
09040303 | 25.6-33.0 mm
SAC
22 kV
I
I
22.0 mm
24.6 mm
25.2 mm
I
SAC
33 kV

26.7 mm
27.7 mm
29.2 mm
I
I
29.7 mm
32.2 mm
c4-124.doc
PVC
PVC-insulated aluminium cable
PIC

Partially insulated cable
SAC
Spaced aerial cable
Invitation to Bid No.: Specification No.: R-124/2542

• 5 -
  Manufacturer:
  Trade-mark:
  Country of origin :
  Bidder :
  Bid No.:
  C4 Price schedule
  PEA
  Item
  Material
  Catalogue
  No.
  No.
  1
  09040300
  Description
  Wire grip, round inside jaw contour type, serpentine jaws, with :
  Grip diameter range
  Safe load, maximum
  :
  2
  09040301
  Ditto as Item 1, but :
  Grip diameter range
  Safe load, maximum
  Date :
  Unit Cost
  (See details
  Total Cost
  (See details
  Quantity
  & conditions
  & conditions
  attached)
  attached)
  pc(s)
  mm
  kg
  mm
  kg
  mm
  pc(s)
  pc(s)
  3
  09040302
  Ditto as Item 1, but :
  Grip diameter range
  Safe load, maximum
  :
  kg
  4
  09040303
  Ditto as Item 1, but :
  Grip diameter range
  II
  Safe load, maximum
  ……… mm
  ….. kg
  pc(s)
  Invitation to Bid No.:
  Specification No.: R-179/2547
  C3 Schedule of detailed requirement
  PEA
  Item Material Quantity
  No.
  1
  09230032
  09230023
  IL
• 4-
  COPY
  Description
  set (s) HOIST, ratchet - type, fiber - glass handle, nylon strap, hotstick eyes on
  safety hooks on both ends, with :
  Capacity
  (single – line/double – line)
  Lifting distance
  (single-line/double-line)
  Weight
  not less than 750 kg/1,500 kg
  (1,653 lbs/3,306 lbs)
  : not less than 3.0 m/1.5 m
  (9.8 f/4.9 ft)
  : not more than 6.2 kg
  set (s) HOIST, ratchet - type,
  lifting distance 0.9 m
  2 ton capacity, fiber glass handle, nylon strap,

1.2 m (3’ 4’), hotstick eyes on safety hooks on

both ends.
:
Invitation to Bid No.:
Specification No. : R-179/2547
C4 Price schedule
Item
PEA
Material
Catalogue
No.
No.
· 1
09230032
Description
-5-
Manufacturer:
Trade-mark:
Country of origin :
Bidder :
Bid No.:
HOIST, ratchet - type, fiber - glass handle, nylon strap, hotstick eyes on
safety hooks on both ends, with:
Capacity
(single-line/double-line)
Lifting distance
(single-line/double – line)
Weight
Date :
COPY
Unit Cost
(See details
Total Cost
(See details
Quantity
& condition
attached)
& conditions
attached)
set(s)
2
09230023
HOIST, ratchet - type, fiber- glass handle, nylon strap, hotstick eyes on
safety hooks on both ends, with:
set(s)
Capacity
:
II
Lifting distance
: